DS1685 Datasheet PDF - Maxim Integrated Products
| Part Number | DS1685 | |
| Description | (DS1685 / DS1687) 3V/5V Real-Time Clocks | |
| Manufacturers | Maxim Integrated Products | |
| Logo |  |
|
|
There is a preview and DS1685 download ( pdf file ) link at the bottom of this page. Total 33 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.com
www.maxim-ic.com
FEATURES
Incorporates Industry-Standard DS1287 PC Clock
plus Enhanced Features Such as:
§ Y2K Compliant
§ +3V or +5V Operation
§ 64-Bit Silicon Serial Number
§ Power-Control Circuitry Supports System Power-
On from Date/Time Alarm or Key Closure
§ 32kHz Output for Power Management
§ Crystal-Select Bit Allows RTC to Operate with
6pF or 12.5pF Crystal
§ SMI Recovery Stack
§ 242 Bytes Battery-Backed NV RAM
§ Auxiliary Battery Input
DS1685/DS1687
3V/5V Real-Time Clocks
§ RAM Clear Input
§ Century Register
§ Date Alarm Register
§ Compatible with Existing BIOS for Original
DS1287 Functions
§ Available as Chip (DS1685) or Stand-Alone
Encapsulated DIP (EDIP) with Embedded
Battery and Crystal (DS1687)
§ Timekeeping Algorithm Includes Leap-Year
Compensation Valid Through 2099
§ Underwriters Laboratory (UL) Recognized
APPLICATIONS
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
PIN CONFIGURATIONS
TOP VIEW
PWR
X1
X2
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
GND
1 24
2 DS1685/ 23
3 DS1685S/ 22
4 DS1685E 21
5 20
6 19
7 18
8 17
9 16
10 15
11 14
12 13
VCC
SQW
VBAUX
RCLR
VBAT
IRQ
KS
RD
GND
WR
ALE
CS
DIP (0.600”)/
SO (0.300”)/
TSSOP (0.173”)
PACKAGE DIMENSION
INFORMATION
www.maxim-ic.com/DallasPackInfo
AD0
AD1
AD2
AD3
AD4
AD5
N.C.
4 3 2 1 28 27 26
5 25
6
7
DS1685Q
24
23
8 22
9 21
10 20
11 19
12 13 14 15 16 17 18
RCLR
VBAT
IRQ
KS
RD
GND
WR
PLCC
PWR
N.C.
N.C.
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
GND
1
2 DS1687
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
EDIP (740 mil)
VCC
SQW
VBAUX
RCLR
N.C.
IRQ
KS
RD
N.C.
WR
ALE
CS
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.
1 of 33
REV: 032604
|
| |
 
www.DataSheet4U.com
DS1685/DS1687 3V/5V Real-Time Clocks
PIN DESCRIPTIONS (continued)
PIN
DS1685
DIP, SO,
TSSOP
PLCC
18 22
19 23
20 24
21 25
22 26
23 27
24 28
DS1687
EDIP
18
19
—
21
22
23
24
NAME
FUNCTION
KS
IRQ
VBAT
RCLR
VBAUX
SQW
VCC
Kickstart Input, Active Low. When VCC is removed from the
DS1685/DS1687, the system can be powered on in response to an active-
low transition on the KS pin, as might be generated from a key closure.
VBAUX must be present and the auxiliary-battery enable bit (ABE) and kick-
start enable bit (KSE) must be set to 1 if the kickstart function is used, and
the KS pin must be pulled up to the VBAUX supply. While VCC is applied, the
KS pin can be used as an interrupt input. If not used, connect to VCC, or to
VBAUX if VBAUX is used.
Interrupt-Request Output, Open Drain, Active Low. The IRQ pin is an
active-low output of the DS1685/DS1687 that can be connected to the
interrupt input of a processor. The IRQ output remains low as long as the
status bit causing the interrupt is present and the corresponding interrupt-
enable bit is set. To clear the IRQ pin, the application software must clear
all the enabled flag bits contributing to IRQ’s active state asserted but
without asserting CS latch addresses. However, no data transfer occurs.
Battery input for any standard 3V lithium cell or other energy source.
Battery voltage must be held between 2.5V and 3.7V for proper operation.
VBAT must be grounded if not used. Diodes should not be placed between
VBAT and the battery. See “Conditions of Acceptability” at
www.maxim-ic.com/UL.
RAM Clear Input, Active Low. If enabled by software, taking RCLR low
clears the 242 bytes of user RAM to FFh. When enabled, RCLR can be
activated whether or not VCC is present. The RCLR function is designed to
be used by a human interface (shorting to ground manually or by a switch)
and not to be driven with external buffers. This pin is internally pulled up.
Do not use an external pullup resistor on this pin.
Auxiliary Battery Input. Required for kickstart and wake-up features. This
input also supports clock/ calendar and user RAM if VBAT is at lower voltage
or is not present. A standard +3V lithium cell or other energy source can be
used. Battery voltage must be held between +2.5V and +3.7V for proper
operation. If VBAUX is not going to be used it should be grounded, and
Auxiliary-Battery Enable bit bank 1, register 4BH, should be written to 0.
See “Conditions of Acceptability” at www.maxim-ic.com/UL.
Square-Wave Output. The SQW pin provides a 32kHz square-wave output,
tREC, after a power-up condition has been detected. This condition sets the
following bits, enabling the 32kHz output; DV1 = 1, and E32K = 1. A square
wave is output on this pin if either SQWE = 1 or E32K = 1. If E32K = 1, then
32kHz is output regardless of the other control bits. If E32K = 0, then the
output frequency is dependent on the control bits in register A. The SQW
pin can output a signal from one of 13 taps provided by the 15 internal
divider stages of the RTC. The frequency of the SQW pin can be changed
by programming Register A as shown in Table 3. The SQW signal can be
turned on and off using the SQWE bit in register B or the E32K bit in
extended register 4Bh. A 32kHz SQW signal is output when the enable-
32kHz (E32K) bit in extended register 4Bh is a logic 1 and VCC is above
VPF. A 32kHz square wave is also available when VCC is less than VPF if
E32K = 1, ABE = 1, and voltage is applied to the VBAUX pin.
DC Power for Primary Power Supply. When VCC is applied within the
normal limits, the device sis fully accessible and data can be written and
read. When VCC is below VPF reads and writes are inhibited.
5 of 33
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for DS1685 electronic component. |
| Information | Total 33 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ DS1685.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| DS1680 | The function is Portable System Controller. Dallas Semiconductor |  |
| DS1682 | The function is Total-Elapsed-Time Recorder. Maxim Integrated |  |
| DS1682 | The function is Total Elapsed Time Recorder. Dallas Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
DS16
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||