AZ2150 Datasheet PDF - ZETTLER Electronics
Part Number | AZ2150 | |
Description | MINIATURE POWER RELAY | |
Manufacturers | ZETTLER Electronics | |
Logo | ||
There is a preview and AZ2150 download ( pdf file ) link at the bottom of this page. Total 2 Pages |
Preview 1 page No Preview Available ! www.DataSheet4U.com
AZ2150
MINIATURE
POWER RELAY
FEATURES
• 30 Amp switching capability for both N.O. and
N.C. contacts
• 1 Form A, B and C contacts available
• DC coils to 120 VDC
• Life expectancy to 10 million operations
• Class B insulation standard
• Class F (155°C) version available
• Available with an epoxy seal for automatic wave
soldering and immersion cleaning
• Proof Tracking Index (PTI/CTI) 175
• UL, CUR file E44211 including versions meeting
UL 508 and UL 873 spacing and contact rating
requirements; VDE 132710 ÜG (some models)
CONTACTS
Arrangement
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current: 30 A
Max. switched voltage: 30 VDC or 300 VAC
UL Rating: See chart for UL contact ratings.
AZ2150 Series meets UL 508 Group A spacing
and UL 873 refrigeration and safety control
requirements. AZ2151 Series meets UL 508
Group B spacing requirements.
VDE Rating:
AZ2150-1A - 25 A at 250 VAC, 1 x 104, resistive
AZ2150-1C - 20 A at 250 VAC, 1 x 104, resistive
Material
Silver cadmium oxide
Resistance
< 20 milliohms initially
(at rated current, voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
500 mW
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
43°C (77°F) at nominal coil voltage
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. (N.O.)
Operate Time (max.)
Max. 12 ms
Typical: 8 ms
Release Time (max.)
Max. 5 ms
Typical: 3.5 ms
Dielectric Strength
2500 Vrms contact to coil
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-55°C (-67°F) to 85°C (185°F)
Storage
-55°C (-67°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
20 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
25 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
Please call the factory.
5. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
www.ZETTLERelectronics.com
2003-03-12
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AZ2150 electronic component. |
Information | Total 2 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ AZ2150.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
AZ2150 | The function is MINIATURE POWER RELAY. ZETTLER Electronics | |
AZ2150W | The function is MINIATURE POWER RELAY. American Zettler | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AZ21
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |