PJ431A Datasheet PDF - Promax-Johnton
Part Number | PJ431A | |
Description | (PJ431x) Programmable Precision References | |
Manufacturers | Promax-Johnton | |
Logo | ||
There is a preview and PJ431A download ( pdf file ) link at the bottom of this page. Total 11 Pages |
Preview 1 page No Preview Available ! www.DataSheet4U.com
PJ431/PJ431A/PJ431B
Programmable Precision References
The PJ431, A, B integrated circuits are three-terminal
programmable shunt regulator diodes. These monolithic
IC voltage references operate as a low temperature coefficient
zener which is programmable from Vref to 36 volts with two
external resistors. These devices exhibit a wide operating
current range of 1.0 to 100mA with a typical dynamic
impedance of 0.22Ω. The characteristics of these
references make them excellent replacements for zener
FEATURES
• Programmable Output Voltage to 36 Volts
• Voltage Reference Tolerance:
PJ431A : ±0.5%, Typ@25°C
PJ431 : ±1%, Typ@25°C
PJ431B : ±2%, Typ@25°C
• Low Dynamic Output Impedance, 0.22 Ω Typical
• Sink Current Capability of 1.0 to 100 mA
• Equivalent Full-Range Temperature Coefficient of 50
ppm/ ℃Typical
• Temperature Compensated for Operation over Full Rated
Operating Temperature Range
• Low Output Noise Voltage
BLOCK DIAGRAM
diodes in many applications such as digital voltmeters, power
supplies , and op amp circuitry. The 2.5 volt reference makes
it convenient to obtain a stable reference from 5.0 volt logic
supplies, and since The PJ431, A, B operates as a shunt
regulator, it can be used as either a positive or negative tage
reference.
TO-92
SOT-89
Pin: 1. Reference
2. Anode
3. Cathode
SOT-23
Pin: 1. Reference
2. Cathode
3. Anode
Pin: 1. Reference
2. Anode
3. Cathode
(Heatsink surface
connected to Pin 2)
SOP-8
Pin: 1. Cathode
2. Anode
3. Anode
4. N.C.
5. N.C.
6. Anode
7. Anode
8. Reference
SOP-8 is an internally modified SOP-8 Package. Pins 2,3,6
and 7 are electrically common to the die attach flag. This
internal lead frame modification decreases package thermal
resistance and increases power dissipation capability when
appropriately mounted on a printed on a printed circuit board.
SOP-8 conforms to all external dimensions of the standard
SOP-8 Package.
CIRCUIT SCHEMATIC
QRDERING INFORMATION
Device
PJ431/ A/ B CT
PJ431/ A/ B CS
PJ431/ A/ B CY
PJ431/ A/ B CX
Operating Temperature
(Ambient)
- 20℃~ +85℃
Package
TO-92
SOP-8
SOT-89
SOT-23
1-11 2003/01 rev.A
|
|
www.DataSheet4U.com
PJ431/PJ431A/PJ431B
Programmable Precision References
FIGURE 4-CATHODE CURRENT versus CATHODE
VOLTAGE
FIGURE 5-CATHODE CURRENT versus CATHODE
VOLTAGE
FIGURE 6-REFERENCE INPUT VOLTAGE versus
AMBIENT TEMPERATURE
FIGURE 7-REFERENCE INPUT CURRENT versus
AMBIENT TEMPERATURE
FIGURE 8-CHANGE IN REFERENCE INPUT
VOLTAGE versus CATHODE VOLTAGE
FIGURE 9 –OFF.STATE CATHODE CURRENT versus
AMBIENT TEMPERATURE
5-11 2003/01 rev.A
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for PJ431A electronic component. |
Information | Total 11 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ PJ431A.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
PJ431 | The function is (PJ431x) Programmable Precision References. Promax-Johnton | |
PJ431A | The function is (PJ431x) Programmable Precision References. Promax-Johnton | |
PJ431B | The function is (PJ431x) Programmable Precision References. Promax-Johnton | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
PJ43
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |