|
|
Número de pieza | ASM1810 | |
Descripción | Push-Pull Output | |
Fabricantes | Alliance Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ASM1810 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! www.DataSheet4U.com
February 2005
ASM1810
rev 1.4
Low Power, 5V µP Reset
- Active LOW, Push-Pull Output
General Description
The ASM1810 is a voltage supervisor with low-power, 5V µP
active LOW Reset, Push-Pull output. Maximum supply current
over temperature is a low 20µA.
The ASM1810 generates an active LOW reset signal whenever
the monitored supply is out of tolerance. A precision reference
and comparator circuit monitor power supply (VCC) level.
Tolerance level options are 5%, 10% and 15%. When an out-of-
tolerance condition is detected, an internal power-fail signal is
generated which forces an active LOW reset signal. After VCC
returns to an in-tolerance condition, the reset signal remains
active for 150ms to allow the power supply and system
microprocessor to stabilize.
Key Features
• Low Supply Current
•20 µA maximum (5.5 V)
• Automatically restarts a microprocessor after power failure
• 150ms reset delay after VCC returns to an in-tolerance con-
dition
• Active LOW power-up reset
• Precision temperature-compensated voltage reference and
comparator
• Eliminates external components
• Low cost TO-92 and compact surface mount SOT-23 pack-
age
• Push-Pull output for minimum current drain
• Operating temperature -40°C to +85°C
The ASM1810 is designed with a push-pull output stage and
operates over the extended industrial temperature range.
Devices are available in low cost TO-92 and compact surface
mount SOT-23 packages.
Other low power products in this family include the ASM1811/
12/15/16/17, ASM1233D and ASM1233M.
Typical Operating Circuit
VCC
ASM1810
RESET
Microprocessor
RESET
Applications
• Set-top boxes
• Cellular phones
• PDAs
• Energy management systems
• Embedded control systems
• Printers
• Single board computers
Block Diagram
VCC 2
Supply
Tolerance
Bias
+
-
Reference
ASM1810
Delay
150ms
Typical
1
RESET
GND
3
GND
Alliance Semiconductor
2575 Augustine Drive . Santa Clara, CA 95054 . Tel: 408.855.4900 . Fax: 408.855.4999 . www.alsc.com
Notice: The information in this document is subject to change without notice
1 page February 2005
rev 1.4
Family Selection Guide
Part #
ASM1810
ASM1811
ASM1812
ASM1815
ASM1816
ASM1817
ASM1233D
ASM1233M
RESET Voltage (V)
4.620, 4.370, 4.120
4.620, 4.350, 4.130
4.620, 4.350, 4.130
3.060, 2.880, 2.550
3.060, 2.880, 2.550
3.060, 2.880, 2.550
4.625, 4.375, 4.125
4.625, 4.375, 2.720
ASM1810
RESET Time
(ms)
150
150
150
150
150
150
350
350
Output Stage
Push-Pull
Open-Drain
Push-Pull
Push-Pull
Open-Drain
Push-Pull
Open-Drain
Open-Drain
RESET Polarity
LOW
LOW
HIGH
LOW
LOW
HIGH
LOW
LOW
Low Power, 5V µP Reset
Notice: The information in this document is subject to change without notice
5 of 9
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet ASM1810.PDF ] |
Número de pieza | Descripción | Fabricantes |
ASM1810 | Push-Pull Output | Alliance Semiconductor |
ASM1810 | Voltage Supervisors Device | ON Semiconductor |
ASM1811 | Low Power 5V uP Reset Active LOW | Alliance Semiconductor |
ASM1812 | Low Power 5V uP Reset Active HIGH | Alliance Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |