DataSheet39.com

What is V048F020T080?

This electronic component, produced by the manufacturer "Vicor Corporation", performs the same function as "(V048x020T080) Voltage Transformation Module".


V048F020T080 Datasheet PDF - Vicor Corporation

Part Number V048F020T080
Description (V048x020T080) Voltage Transformation Module
Manufacturers Vicor Corporation 
Logo Vicor Corporation Logo 


There is a preview and V048F020T080 download ( pdf file ) link at the bottom of this page.





Total 15 Pages



Preview 1 page

No Preview Available ! V048F020T080 datasheet, circuit

www.DataSheet4U.com
VTM
V•I ChipTM – VTM
Voltage Transformation Module
V048K020T080
K indicates BGA configuration. For other
mounting options see Part Numbering below.
• 48 V to 2 V V•I Chip Converter
• 80 A (120 A for 1 ms)
• High density – 320 A/in3
• 125°C operation
• 1 µs transient response
• >3.5 million hours MTBF
Vf = 26 - 55 V
VOUT = 1.1 - 2.3 V
IOUT = 80 A
K = 1/24
ROUT = 1.5 mmax
©
• Small footprint – 75 A/in2
• Typical efficiency 94% at 2 V/50 A
• Low weight – 0.5 oz (14 g)
• No output filtering required
• Pick & Place / SMD
• BGA or J-Lead packages
Actual size
Product Description
Absolute Maximum Ratings
The V048K020T080 VI Chip Voltage Transformation
Module (VTM) breaks records for speed, density and
Parameter
Values
Unit
Notes
efficiency to meet the demands of advanced DSP,
FPGA, ASIC, processor cores and microprocessor
applications at the point of load (POL) while providing
+In to -In
+In to -In
-1.0 to 60.0
Vdc
100 Vdc For 100 ms
isolation from input to output. It achieves a response
PC to -In
-0.3 to 7.0
Vdc
time of less than 1 µs and delivers up to 80 A in a
TM to -In
-0.3 to 7.0
Vdc
volume of less than 0.25 in3 while providing low output
voltages with unprecedented efficiency. It may be
paralleled to deliver hundreds of amps at an output
voltage settable from 1.1 to 2.3 Vdc.
P R E L I M I N A RYThe VTM V048K020T080’s nominal output voltage is
2 Vdc from a 48 Vdc input factorized bus, Vf, and is
controllable from 1.1 to 2.3 Vdc at no load, and from
1.1 to 2.2 Vdc at full load, over a Vf input range of 26
to 55 Vdc. It can be operated either open- or closed-loop
depending on the output regulation needs of the
application. Operating open-loop, the output voltage
tracks its Vf input voltage with a transformation ratio,
K = 1/24, and an output resistance, ROUT = 1.3 milliohm, to
enable applications requiring a programmable low
output voltage at high current and high efficiency.
VC to -In
-0.3 to 19.0
Vdc
+Out to -Out
-0.1 to 4.0
Vdc
Isolation voltage
Operating junction temperature
2,250
-40 to 125
Vdc Input to Output
°C See Note
Output current
80 A Continuous
Peak output current
Case temperature during reflow
120
208
A For 1 ms
°C
Storage temperature
-40 to 150
°C
Output power
Peak output power
174 W Continuous
261 W For 1 ms
Note: The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by the temperature monitor (TM) signal and by a shutdown comparator.
Closing the loop back to an input Pre-Regulation
Module (PRM) or DC-DC converter can compensate
for ROUT.
Part Numbering
The 2 V VTM achieves break-through current density of
320 A/in3 in a VI Chip package compatible with
standard pick-and-place and surface mount assembly
processes. The VI Chip BGA package supports in-board
mounting with a low profile of 0.16" (4 mm) over the
board. A J-lead package option supports on-board
surface mounting with a profile of only 0.25" (6 mm)
over the board. The VTM’s fast dynamic response and
low noise eliminate the need for bulk capacitance at the
load, substantially increasing the POL density while
improving reliability and decreasing cost.
V 048
Voltage
Transformation
Module
Input Voltage
Designator
K
Configuration Options
F = On-board (Fig.15)
K = In-board (Fig.14)
020 T 080
Output Voltage
Designator
(=VOUT x10)
Output Current
Designator
(=IOUT)
Product Grade Temperatures (°C)
Grade Storage Operating
T -40 to150 -40 to125
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K020T080 Rev. 1.2
Page 1 of 15

line_dark_gray
V048F020T080 equivalent
Specifications, continued
THERMAL
Symbol
RθJC
RθJB
RθJA
RθJA
Parameter
Over temperature shutdown
Thermal capacity
Junction-to-case thermal impedance
Junction-to-BGA thermal impedance
Junction-to-ambient 1
Junction-to-ambient 2
Min
125
Typ Max
Unit
130 135
°C
0.61 Ws/°C
1.1 °C/W
2.1 °C/W
6.5 °C/W
5.0 °C/W
Notes
1. V048K020T080 surface mounted in-board to a 2" x 2" FR4 board, 4 layers 2 oz Cu, 300 LFM.
2. V048K020T080 with a 0.25"H heatsink surface mounted on FR4 board, 300 LFM.
Note
Junction temperature
V•I CHIP STRESS DRIVEN PRODUCT QUALIFICATION PROCESS
Test
High Temperature Operational Life (HTOL)
P R E L I M I N A RYTemperaturecycling
High temperature storage
Moisture resistance
Temperature Humidity Bias Testing (THB)
Pressure cooker testing (Autoclave)
Highly Accelerated Stress Testing (HAST)
Solvent resistance/marking permanency
Mechanical vibration
Mechanical shock
Electro static discharge testing – human body model
Standard
JESD22-A-108-B
JESD22-A-104B
JESD22-A-103A
JESD22-A113-B
EIA/JESD22-A-101-B
JESD22-A-102-C
JESD22-A-110B
JESD22-B-107-A
JESD22-B-103-A
JESD22-B-104-A
EIA/JESD22-A114-A
Environment
125°C, Vmax, 1,008 hrs
-55°C to 125°C, 1,000 cycles
150°C, 1,000 hrs
Moisture sensitivity Level 5
85°C, 85% RH, Vmax, 1,008 hrs
121°C, 100% RH, 15 PSIG, 96 hrs
130°C, 85% RH, Vmax, 96 hrs
Solvents A, B & C as defined
20g peak, 20-2,000 Hz, test in X, Y & Z directions
1,500g peak 0.5 ms pulse duration, 5 pulses in 6 directions
Meets or exceeds 2,000 Volts
Electro static discharge testing – machine model
EIA/JESD22-A115-A
Meets or exceeds 200 Volts
Highly Accelerated Life Testing (HALT)
Per Vicor Internal
Test Specification*
Operation limits verified, destruct margin determined
Dynamic cycling
Per Vicor internal
test specification*
Constant line, 0-100% load, -20°C to 125°C
* For details of the test protocols see Vicor’s website.
V•I CHIP BALL GRID ARRAY INTERCONNECT QUALIFICATION
Test
BGA solder fatigue evaluation
Solder ball shear test
Standard
IPC-9701
IPC-SM-785
IPC-9701
Environment
Cycle condition: TC3 (-40 to +125°C)
Test duration: NTC-B (500 failure free cycles)
Failure through bulk solder or copper pad lift-off
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K020T080 Rev. 1.2
Page 5 of 15


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for V048F020T080 electronic component.


Information Total 15 Pages
Link URL [ Copy URL to Clipboard ]
Download [ V048F020T080.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
V048F020T080The function is (V048x020T080) Voltage Transformation Module. Vicor CorporationVicor Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

V048     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search