|
|
PDF MDU200 Data sheet ( Hoja de datos )
| Número de pieza | MDU200 | |
| Descripción | Power Factor Correction | |
| Fabricantes | Power-One | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MDU200 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
MPU200/MDU200 Series Data Sheet
Features
• RoHS lead free solder and lead solder exempted products
are available
• Power Factor Correction (PFC) meets EN61000-3-2
• Same size, airflow, and construction as MPU150/MDU150
with over 33% more power
• Single-wire current sense on quad model outputs V1 and V2
• Remote sense on quad model outputs V1 and V2
• Current share and N+1 redundancy (standard on all models)
• Overtemperature, overload, and overvoltage protection
• Available with SAE mountings
• MDU200 models have 48VDC input
Description
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products
incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. In this series, 200W
of continuous output power is provided with single or multiple output units suited for distributed power or central power applications.
The series provides high current +3.3V and +5V on a single platform to support mixed-mode, high-speed digital circuitry.
Power-One's dual-converter architecture combines high reliability with exceptional regulation. All multiple-output models feature
remote sense on outputs V1 and V2 to provide independent compensation of output cable losses.
Other standard features include independent current sharing on V1 and V2 quad-model outputs, thermal shutdown, and remote
inhibit. Airflow of 300 linear feet per minute (LFM) is required to deliver the full power density of greater than 4.0 watts per cubic inch.
The MDU200 Series provides the same benefits as the MPU200 Series, with a nominal 48 volt DC input.
www.DataSheet4U.com
AC Input, Single-Output Model Selection
MODEL
MPU200-1012
MPU200-1024
MPU200-1048
OUTPUT
VOLTAGE
12V
24V
48V
ADJUSTMENT
RANGE
11.6V to 16V
22.8V to 29.2V
45V to 56V
MAXIMUM OUTPUT
CURRENT (NOTE 2)
17.0A
8.35A
4.2A
200W/225W PK WITH 300 LFM FORCED-AIR COOLING (NOTE 1)
PEAK OUTPUT
CURRENT (NOTE 2)
19.0A
9.4A
4.7A
LINE
REGULATION
0.1%
0.1%
0.1%
LOAD
REGULATION
1%
1%
1%
RIPPLE & NOISE
%p-p (NOTE 3)
1%
1%
1%
INITIAL SETTING
ACCURACY
11.97V to 12.03V
23.95V to 24.05V
47.9V to 48.1V
AC Input, Multiple-Output Model Selection
200W WITH 300 LFM FORCED-AIR COOLING (NOTE 1)
ISOLATED V3 AND V4 CAN BE USED AS POSITIVE OR NEGATIVE OUTPUTS
MODEL
OUTPUT
VOLTAGE
ADJUSTMENT
RANGE
MAXIMUM OUTPUT
CURRENT (NOTE 2)
LINE
REGULATION
LOAD
REGULATION
+5V
5.0V to 5.5V
30A (Note 4)
0.4%
1%
MPU200-4530
+3.3V
12V
3.15V to 3.60V
10.8V to 13.2V
15A (Note 4)
8A (Note 5)
0.6%
0.4%
1.5%
10%
12V 10.8V to 13.2V 4A (Note 5)
0.4%
10%
NOTES: 1) This product is not rated for convection applications.
2) Output currents ratings are expressed with 300 LFM forced air.
3) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth.
4) Total current for V1 and V2 is not to exceed 35A.
5) Total power on V3 and V4 is not to exceed 100W.
RIPPLE & NOISE
%Pk-Pk (NOTE 3)
1%
1.5%
1%
1%
INITIAL SETTING
ACCURACY
4.98V to 5.02V
3.28V to 3.32V
11.94V to 12.06V
11.60V to 12.40V
Ordering Information:
OPTIONS
Metric Mounting
Isolation Diode
RoHS lead solder exemption
RoHS compliant for all 6 substances
SUFFIXES TO ADD TO PART NUMBER
Add “M” as a suffix to the model number to order chassis with
M3 x 0.7 mounting inserts. Consult factory for availability.
Offered on single-output models. Add “D” to the part number suffix if an isolation diode is needed.
Consult factory for availability.
No RoHS suffix character required.
Add “G” as the last character of the part number.
JUL 14, 2006 revised to JUL 24, 2006
Page 1 of 6
www.power-one.com
1 page  
MPU200/MDU200 Series Data Sheet
Overall Size: 8.00" x 4.20" x 1.50" (203.2mm x 106.7mm x 38.1mm) Weight: 2.0 lb (0.89 kg)
SINGLE OUTPUT
OUTPUTS:
8-32 SCREW
CONNECTIONS
(4PL)
+V1
RTN
MDU200
DC
INPUT J1
+5
+4
3
2
1
MPU200 J1
AC L 1
INPUT
N3
5
V1,V.
ADJ.
INTERFACE CONNECTIONS (J300)
PIN
S
10. +S, V1
9. -S, V1
8. CURRENT SHARE, V1
7. NO CONNECTION
6. NO CONNECTION
5. NO CONNECTION
4. OUTPUT GOOD, V1
3. POWER FAIL WARNING
2. INHIBIT
1. SIGNAL GROUND
MOLEX SERIES 5268-NA, P/N: 22-05-7105, PINS
ON 2.50mm CENTERS.
MATES WITH MOLEX:
HOUSING SERIES 5264-N, P/N: 50-37-5103 (&)
PINS SERIES 5263, P/N: 80-70-1040 (LOOSE)
3 TBD
NOTE:
MAX. LEAD PROTRUSION IS 0.0625" (1.588mm)
ON THE FOUR BOTTOM MOUNTING HOLES.
MAX. LEAD PROTRUSION OF 0.25" (6.25mm)
IS ACCEPTABLE ON THE FOUR SIDE MOUNTING
HOLES.
CONNECTOR
J1
J300
MOLEX
SERIES
41695
41695
2139
5264-N
HOUSING
09-50-8051
09-50-8051
09-50-3051
PIN PINS
SERIES (LOOSE)
6838 08-50-0189
2478 08-50-0106
2478 08-50-0106
PINS
(CHAIN)
WIRE
GAUGE
08-50-0187 18-20AWG
08-50-0105 18-20AWG
08-50-0105 18-20AWG
50-37-5103 5263 08-70-1040 08-70-1039 22-28AWG
CHASSIS: 0.063" (1.6mm) ALUMINUM ALLOY,
WITH CLEAR FINISH
JUL 14, 2006 revised to JUL 24, 2006
Page 5 of 6
www.power-one.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet MDU200.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MDU20 | Marine Display Unit Users Manual |  Comark |
| MDU200 | Power Factor Correction | Power-One |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |