DI-8B32 Datasheet PDF - ETC
Part Number | DI-8B32 | |
Description | Analog Current Input Modules | |
Manufacturers | ETC | |
Logo | ||
There is a preview and DI-8B32 download ( pdf file ) link at the bottom of this page. Total 2 Pages |
Preview 1 page No Preview Available ! DI-8B32 Analog Current Input Modules
FEATURES
• Accepts Milliamp Level Signals
• High Level Voltage Outputs
• 1500Vrms Transformer Isolation
• ANSI/IEEE C37.90.1 Transient Pro-
tection
• Input Protected to 30VAC Continu-
ous
• 120dB CMR
• 70dB NMR at 60Hz
• ±0.05% Accuracy
• ±0.02% Linearity
• Low Drift with Ambient Temperature
• CSA, FM and CE Certifications
Pending
• Mix and Match Module Types
DESCRIPTION
DI-8B modules are an optimal solution
for monitoring real-world process signals
and providing high level signals to a data
acquisition system. Each DI-8B32 module
isolates, filters and amplifies a process
current input signal and provides an analog
voltagewww.DataSheet4U.com output.
Current to voltage conversion is accom-
plished internal to the module to ensure
high accuracy.
Signal filtering is accomplished with a
three-pole filter optimized for time and
frequency response which provides 70dB
of normal-mode-rejection at 60Hz.
One pole of this filter is on the field side of
the isolation barrier for anti-aliasing, and
the other two are on the system side.
A special input circuit on the 8B32 module
provides protection against accidental
connection of power-line voltages up to
30VAC.
Isolation is provided by optical coupling
to suppress transmission of common mode
spikes or surges. The module is powered
from +5VDC, ±5%.
The modules are designed for installation
in Class I, Division 2 hazardous locations
and have a high level of immunity to envi-
ronmental noise.
SPECIFICATIONS
Typical at TA = +25ºC and +5V Power
DI-8B32
Input Range
0mA to 20mA or 4mA to 20mA
Input Resistance
Normal
Power Off
<50Ω
<50Ω
Input Protection
Continuous
Transient
40VAC
ANSI/IEEE C37.90.1
CMV, Input to Output
1500Vrms max
Transient, Input to Output
ANSI/IEEE C37.90.1
CMR (50Hz or 60Hz)
120dB
NMR
70dB at 60Hz
Accuracy*
±0.05% span
Nonlinearity
±0.02% Span
Stability
Output
Gain
±25ppm/ºC
±50ppm/ºC
Noise
Output, 100kHz
250µVrms
Bandwidth, -3dB
3Hz
Response Time, 90% Span
150ms
Output Range
0 to +5V
Output Protection
Transient
Continuous Short to Ground
ANSI/IEEE C37.90.1
Power Supply Voltage
+5VDC ±5%
Power Supply Current
30mA
Power Supply Sensitivity
±25ppm/%
Mechanical Dimensions
1.11" × 1.65" × 0.40"
(28.1mm × 41.9mm × 10.2mm)
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
-40ºC to +85ºC
-40ºC to +85ºC
0 to 95% Noncondensing
*Includes nonlinearity, hysteresis and repeatability.
DATAQ Instruments, Inc. • 241 Springside Drive • Akron, Ohio 44333 • Tel: 330-668-1444 • Email: [email protected] • www.dataq.com
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for DI-8B32 electronic component. |
Information | Total 2 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ DI-8B32.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
DI-8B32 | The function is Analog Current Input Modules. ETC | |
DI-8B35 | The function is Linearized 4-Wire RTD Input Modules. ETC | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
DI-8
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |