DataSheet39.com

What is 515-1040?

This electronic component, produced by the manufacturer "Dialight Corporation", performs the same function as "Rectangular Optical Light Pipe".


515-1040 Datasheet PDF - Dialight Corporation

Part Number 515-1040
Description Rectangular Optical Light Pipe
Manufacturers Dialight Corporation 
Logo Dialight Corporation Logo 


There is a preview and 515-1040 download ( pdf file ) link at the bottom of this page.





Total 1 Pages



Preview 1 page

No Preview Available ! 515-1040 datasheet, circuit

4mm Round
NEW
® OptopipeTM
Optical Light Pipe, 4 Array, Panel Mounted
515-1040
5.54
DIRECTION [.218]
OF LIGHT (RIBS)
.38
[.015]
TYP
.94 [.037]
TYP; 3 PLCS
(REF)
DIFFUSED FRONT
SURFACE
23.11
[.91] REF
19.05
[.750]
12.70
[.500]
6.35
[.250]
1.27
[.050]
4.57
[.180]
MAJOR DIA
Ø 3.96 [.156]
TYP; 4 PLCS
3.25 [.128]
TYP (REF)
3 PLCS
10.29
[.405]
4 PLCS
2.29 [.090]
TYP
3 PLCS
FRONT
PANEL
C.L LED
.25
[.010]
5.54
[.218]
9.40
[.370]
1.19
[.047]
.51
[.020]
MAX
TOP SURFACE
OF LED
Dimensions in mm [inches]
RECOMMENDED PANEL HOLE SIZE: Ø .175
Recommended
MicroLED SMT LEDs
for use with 515-1040
PART NO.
597-3xx1-2xx
597-3xx1-5xx
597-77x1-2xx
597-77x1-5xx
PAGE #
1-21
1-30
1-23 & 1-24
1-31
2
www.DataSheet4U.com
Features
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to panel by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight Optopipe Light Pipe Description
This Optopipe™ is mounted through the rear of the panel and is retained by press fit. The light pipe is not attached to
the PCB at any point but floats above it. The diffused light emitting surfaces appear bright and uniformly illuminated. The
recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The light source’s emitting
surface should be located no more than 0.020" or 0.5mm from the Optopipe™. The SMT LEDs are mounted in a straight
line under the rear of the part on a 6.35 mm pitch. The light pipe material is water clear transmissive polycarbonate rated
UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 2-17


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 515-1040 electronic component.


Information Total 1 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 515-1040.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
515-1040The function is Rectangular Optical Light Pipe. Dialight CorporationDialight Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

515-     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search