|
|
PDF ISL9201 Data sheet ( Hoja de datos )
| Número de pieza | ISL9201 | |
| Descripción | Li-ion Battery Charger | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ISL9201 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
®
Data Sheet
February 22, 2007
ISL9201
FN6429.1
Li-ion Battery Charger
The ISL9201 is an integrated single-cell Li-ion or Li-polymer
charger capable of operating at an input voltage as low as
2.5V. The low operating voltage allows the charger to work
with a variety of AC adapters.
The ISL9201 operates as a linear charger when the AC
adapter is a voltage source. The battery is charged in a
standard Li-ion charge profile, i.e. a constant current phase
followed be a constant voltage phase (CC/CV). The charge
current during the constant current phase is determined by the
external resistor connected to the IREF pin. When the adapter
output is a current-limited voltage source and the current limit
is smaller than the programmed constant current of the IC, the
ISL9201 operates as a pulse charger where the charge
current is determined by the current limit of the AC adapter
during the constant current phase. The ISL9201 operates in a
linear mode during the constant voltage phase in both adapter
cases.
The ISL9201 incorporates ThPermelaimguianradrTyM, which protects
the IC against over-temperature. If the die temperature rises
above a typical value of +110 °C, the thermal foldback function
reduces the charge current to prevent further temperature
rise. The ISL9201 also includes a timer to set the time
reference for the delay time of the end-of-charge (EOC) and
recharge indications. The timer is programmable with an
external capacitor. A logic input and an open-drain logic output
are available for controlling the charger and indicating the
charger status. The EN pin enables the charger. The STATUS
pin is an open-drain output which turns on when the charger is
delivering current. The charger uses a 10 Ld 3x3 DFN
package to maximize thermal conductivity.
Ordering Information
PART
PART
TEMP.
PACKAGE PKG
NUMBER MARKING RANGE (°C) (Pb-free) DWG. #
ISL9201IRZ DLGA
-40 to +85 10 Ld 3x3 DFN L10.3x3
ISL9201IRZ-T DLGA
-40 to +85 10 Ld 3x3 DFN L10.3x3
Tape & Reel
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• Complete Charger for Single-Cell Li-ion/Polymer Batteries
• Integrated Pass Element and Current Sensor
• No External Blocking Diode Required
• Low Component Count and Cost
• 25mV Voltage Accuracy Over-Temperature and Input
Voltage Range
• 20mV Voltage Accuracy at Room Temperature
• Programmable Charge Current
• Charge Current Thermal Foldback for Thermal Protection
(ThermaguardTM)
• Trickle Charge for Fully Discharged Batteries
• Power Presence and Charge/EOC Indications
• Less than 4µA Leakage Current off the Battery when No
Input Power Attached or Charger Disabled
• Ambient Temperature Range: -40°C to +85°C
• DFN Package
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Mobile Phones
• Blue-Tooth Devices
• PDAs
• MP3 Players
• Stand-Alone Cradle or Travel Chargers
• Other Handheld Devices
Pinout
ISL9201
(10 LD DFN)
TOP VIEW
VIN 1
GND 2
STATUS 3
TIME 4
GND 5
10 VBAT
9 VSEN
8 IREF
7 V2P8
6 EN
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1 page  
Functional Block Diagram
ISL9201
VIN
C1
RIREF
IREF
(16 LD OPTION)
EN
QMAIN
TEMPERATURE
MONITORING
IT
IR
CURRENT
REFERENCES
IMIN = IR/10
QSEN
100000:1
CURRENT
MIRROR
ISEN
REFERENCES
INPUT_OK
+
VIN
+
C- A
CHRG
- VPOR
++
80MV
-
+
VA-
VCH
TRICKLE/FAST
ISEN
+
- MIN_I
MINBAT
+
-
VMIN
VRECHRG
+
INPUT_OK
-
RECHARGE
LOGIC
ESD DIODE
STATUS
VBAT
V2P8
VSEN
STATUS
CTIME
TIME
GND
GND
OSC
COUNTER
5 FN6429.1
February 22, 2007
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet ISL9201.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ISL9200 | Charging System Safety Circuit | Intersil Corporation |
| ISL9201 | Li-ion Battery Charger | Intersil Corporation |
| ISL9203 | Li-ion/Li Polymer Battery Charger | Intersil Corporation |
| ISL9203A | Li-ion/Li Polymer Battery Charger | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |