|
|
PDF XM1001-QH Data sheet ( Hoja de datos )
| Número de pieza | XM1001-QH | |
| Descripción | GaAs MMIC Image Reject Mixer | |
| Fabricantes | Mimix Broadband | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XM1001-QH (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
10.0-34.0 GHz Image Reject Mixer
QFN, 4x4 mm
February 2007 - Rev 15-Feb-07
Features
Fundamental Image Reject Mixer
6.0 dB Conversion Loss
20.0 dB Image Rejection
+25.0 dBm Input Third Order Intercept (IIP3)
4x4 mm, QFN -- ROHS Compliant
M1001-QH
General Description
Mimix Broadband’s 10.0-34.0 GHz GaAs MMIC
fundamental image reject mixer with high linearity has
a conversion loss of 8.0 dB with a 20.0 dB image
rejection across the band. I and Q mixer outputs are
provided and an external 90 degree hybrid is required
to select the desired sideband.This MMIC uses Mimix
Broadband’s 0.15 µm GaAs PHEMT device model
technology, and is based upon electron beam
lithography to ensure high repeatability and
uniformity.The device comes in a low-cost 4x4 mm
www.DataSheet4U.com QFN surface mount plastic package. This device is well
suited for Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Absolute Maximum Ratings
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
+0.3 VDC
+20.0 dBm
+20.0 dBm
-65 to +165 OC
-55 to +125 OC
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF)
GHz 10.0 - 34.0
Frequency Range (LO)
GHz 8.0
- 36.0
Frequency Range (IF)
GHz DC - 4.0
RF Return Loss (S11)
dB - 10.0 -
IF Return Loss (S22)
dB - TBD -
LO Return Loss (S33)
dB - TBD -
Conversion Loss (S21)
dB - 6.0 -
LO Input Drive (PLO)
dBm 12.0 15.0 18.0
Image Rejection
dBc - 20.0 -
Isolation LO/RF
dB - 16.0 -
Isolation LO/IF
dB - TBD -
Isolation RF/IF
dB - TBD -
Input Third Order Intercept (IIP3)
dBm - +25.0 -
Gate Bias Voltage (Vg1)
VDC -2.0 -0.5 +0.1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page  
10.0-34.0 GHz Image Reject Mixer
QFN, 4x4 mm
February 2007 - Rev 15-Feb-07
M1001-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation.The package is a low-cost plastic package. Vacuum tools or other suitable pick and place
equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder
connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF
performance degradation, but reduced reliability and life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
Ramp Up Rate
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
SnPb
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
10-20 sec
4-6 ºC/sec
Pb Free
3-4 ºC/sec
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
4-6 ºC/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering
XM1001-QH-0G00
XM1001-QH-0G0T
XM1001-QH-EV1
Description
Matte Tin plated RoHS compliant QFN 4x4 24L surface mount package in bulk quantity
Matte Tin plated RoHS compliant QFN 4x4 24L surface mount package in tape and reel
XM1001-QH Evaluation Board
We also offer this part with alternative plating. Please contact your regional sales manager for more information regarding different
plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet XM1001-QH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XM1001-QH | GaAs MMIC Image Reject Mixer | Mimix Broadband |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |