|
|
Número de pieza | ISL43L220 | |
Descripción | Dual SPDT Analog Switch | |
Fabricantes | Intersil Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ISL43L220 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! ®
Data Sheet
April 12, 2005
ISL43L220
FN6093.2
Ultra Low ON-Resistance, Low Voltage,
Single Supply, Dual SPDT Analog Switch
The Intersil ISL43L220 device is a low ON-resistance, low
voltage, bidirectional, dual single-pole/double-throw (SPDT)
analog switch designed to operate from a single +1.1V to
+4.5V supply. Targeted applications include battery powered
equipment that benefit from low RON (0.22Ω) and fast
switching speeds (tON = 11ns, tOFF = 5ns). The digital logic
input is 1.8V logic-compatible when using a single +3V supply.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL43L220 is offered in a small form factor package,
alleviating board space limitations.
The ISL43L220 is a committed dual single-pole/double-throw
(SPDT) that consist of two normally open (NO) and two
normally closed (NC) switches. This configuration can also be
used as a dual 2-to-1 multiplexer. The ISL43L220 is pin
compatible with the MAX4684 and MAX4685.
www.DataSheet4U.com
TABLE 1. FEATURES AT A GLANCE
ISL43L220
Number of Switches
2
SW SPDT or 2-1 MUX
4.3V RON
4.3V tON/tOFF
3V RON
3V tON/tOFF
1.8V RON
1.8V tON/tOFF
Packages
0.22Ω
11ns/5ns
0.26Ω
14ns/6ns
0.5Ω
20ns/8ns
10Ld 3x3 thin DFN
Features
• Pb-Free Available as an Option (RoHS Compliant)
(See Ordering Info)
• ON Resistance (RON)
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.22Ω
- V+ = +3.0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.26Ω
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5Ω
• RON Matching Between Channels. . . . . . . . . . . . . . . . 0.03Ω
• RON Flatness Across Signal Range . . . . . . . . . . . . . . 0.03Ω
• Single Supply Operation. . . . . . . . . . . . . . . . . +1.1V to +4.5V
• Low Power Consumption (PD). . . . . . . . . . . . . . . . . . <0.3µW
• Fast Switching Action (V+ = +4.3V)
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5ns
• Guaranteed Break-Before-Make
• 1.8V Logic Compatible (+3V supply)
• Available in 10 lead 3x3 thin DFN
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >9kV
Applications
• Battery powered, handheld, and portable equipment
- Cellular/mobile phones
- Pagers
- Laptops, notebooks, palmtops
• Portable Test and Measurement
• Medical Equipment
• Audio and video switching
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1 page ISL43L220
Electrical Specifications - 3V Supply
Test Conditions: V+ = +2.7V to +3.3V, GND = 0V, VINH = 1.4V, VINL = 0.5V (Notes 4, 6),
Unless Otherwise Specified (Continued)
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(°C) MIN
TYP
(NOTE 5)
MAX UNITS
OFF Isolation
RL = 50Ω, CL = 5pF, f = 100kHz, VCOM = 1VRMS 25 - 68 - dB
(See Figure 4)
Crosstalk (Channel-to-Channel)
RL = 50Ω, CL = 5pF, f = 100kHz, VCOM = 1VRMS
25 -
-95
- dB
(See Figure 6)
Total Harmonic Distortion
f = 20Hz to 20kHz, VCOM = 2VP-P, RL = 600Ω
NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 7)
COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 7)
POWER SUPPLY CHARACTERISTICS
25
25
25
- 0.003 -
%
- 115 - pF
- 224 - pF
Power Supply Range
Full 1.1 - 4.5 V
Positive Supply Current, I+
V+ =1.1V to 3.6V, VIN = 0V or V+
25 - 0.014 - µA
Full - 0.52 - µA
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, VINL
Input Voltage High, VINH
Input Current, IINH, IINL
V+ = 3.3V, VIN = 0V or V+ (Note 8)
Full -
Full 1.4
Full -0.5
-
-
-
0.5 V
-V
0.5 µA
Electrical Specifications - 1.8V Supply
Test Conditions: V+ = +1.65V to +2V, GND = 0V, VINH = 1.0V, VINL = 0.4V (Notes 4, 6),
Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(°C) MIN
TYP
(NOTE 5)
MAX UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
ON Resistance, RON
V+ = 1.65V, ICOM = 100mA, VNO or VNC = 0V to V+,
(See Figure 5, Note 8)
Full
25
Full
0
-
-
- V+ V
0.5 0.8 Ω
- 0.8 Ω
NO or NC OFF Leakage Current, V+ = 2.0V, VCOM = 0.3V, 1.8V, VNO or VNC = 1.8V, 0.3V 25 - 1.1 - nA
INO(OFF) or INC(OFF)
Full - 25 - nA
COM ON Leakage Current,
ICOM(ON)
V+ = 2.0V, VCOM = 0.3V, 1.8V, or VNO or VNC = 0.3V,
25
-
1.7
- nA
1.8V, or Floating
Full - 48 - nA
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
V+ = 1.65V, VNO or VNC = 1.0V, RL = 50Ω, CL = 35pF
(See Figure 1, Note 8)
25
Full
-
-
22 28 ns
- 33 ns
Turn-OFF Time, tOFF
V+ = 1.65V, VNO or VNC = 1.0V, RL = 50Ω, CL = 35pF
(See Figure 1, Note 8)
25
Full
-
-
9 15 ns
- 20 ns
Break-Before-Make Time Delay, tD V+ = 2.0V, VNO or VNC = 1.0V, RL = 50Ω, CL = 35pF
Full
2
9
- ns
(See Figure 3, Note 8)
Charge Injection, Q
OFF Isolation
CL = 1.0nF, VG = 0V, RG = 0Ω (See Figure 2)
25 - 49 - pC
RL = 50Ω, CL = 5pF, f = 100kHz, VCOM = 1VRMS (See 25
-
68
- dB
Figure 4)
Crosstalk (Channel-to-Channel)
RL = 50Ω, CL = 5pF, f = 100kHz, VCOM = 1VRMS (See
25
-
-95
- dB
Figure 6)
NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 7)
25
-
115
- pF
COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 7)
25
-
224
- pF
5 FN6093.2
April 12, 2005
5 Page ISL43L220
Typical Performance Curves TA = 25°C, Unless Otherwise Specified (Continued)
60
50
40
30
85°C 25°C
20
-40°C
10
1 1.5 2 2.5 3 3.5 4 4.5
V+ (V)
FIGURE 17. TURN - ON TIME vs SUPPLY VOLTAGE
14
13
12
11
10
9 85°C
8
7 -40°C
6 25°C
5
4
3
1 1.5 2 2.5 3 3.5 4 4.5
V+ (V)
FIGURE 18. TURN - OFF TIME vs SUPPLY VOLTAGE
V+ = 3V
0
GAIN
-20
PHASE
RL = 50Ω
VIN = 0.2VP-P to 2VP-P
1 10 100
FREQUENCY (MHz)
FIGURE 19. FREQUENCY RESPONSE
0
20
40
60
80
100
600
-10
V+ = 3V
-20
10
20
-30 30
-40 40
-50 50
-60
ISOLATION
-70
60
70
-80 80
CROSSTALK
-90 90
-100
100
-110
1k
10k 100k 1M
10M
110
100M 500M
FREQUENCY (Hz)
FIGURE 20. CROSSTALK AND OFF ISOLATION
100
V+ = 4.5V
50
0
25°C
-50
85°C
-100
01234
VCOM/NX (V)
FIGURE 21. ON LEAKAGE vs SWITCH VOLTAGE
5
50
V+ = 4.5V
VCOM = 0.3V
0
-50
-100
85°C
25°C
-150
01234
VNX (V)
FIGURE 22. OFF LEAKAGE vs SWITCH VOLTAGE
5
11 FN6093.2
April 12, 2005
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet ISL43L220.PDF ] |
Número de pieza | Descripción | Fabricantes |
ISL43L220 | Dual SPDT Analog Switch | Intersil Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |