|
|
Datasheet A8530 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | A8530 | Ultracompact 6-Channel Backlight and Flash/Torch White LED Driver A8530
Ultracompact 6-Channel Backlight and Flash/Torch White LED Driver
Features and Benefits
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Proprietary adaptive control scheme (1×, 1.5×, 2×) 0.5% typical LED current matching 2 separate serial interfaces for dimming control Drives up to 6 white LEDs (4 | Allegro MicroSystems | led |
A85 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | A8500 | Flexible WLED/RGB Backlight Driver A8500 Flexible WLED/RGB Backlight Driver for Medium Size LCDs
Features and Benefits
▪ Active current sharing between LED strings for ±1.5% typical current matching and ±1.2% typical accuracy
▪ Drive up to 12 series × 8 parallel = 96 LEDs (Vf = 3.2 V, If = 20 mA)
▪ Flexible dimming, using a Allegro MicroSystems driver | | |
2 | A8501 | 4 Channel x 100 mA WLED/RGB Driver A8501
2 MHz, 4 Channel×100 mA WLED/RGB Driver with Output Disconnect
Features and Benefits
▪ 600 kHz to 2.2 MHz switching frequency—ability to operate above the AM band
▪ Internal bias supply for single-supply operation (VIN = 6.8 to 21 V) ▪ Boost converter with integrated 40 V DMOS switch Allegro MicroSystems driver | | |
3 | A8501 | PWM CONTROL STEP-UP DC-DC CONVERTER AiT Semiconductor Inc.
www.ait-ic.com
A8501
OLED DRIVER PWM CONTROL STEP-UP DC-DC CONVERTER
DESCRIPTION
FEATURES
The A8501 Series is a fixed frequency, constant current step-up DC/DC converter ideal for driving OLED. Output voltage of up to 22V can be derived, and from a li-ion battery supply, t AiT Semiconductor converter | | |
4 | A8510 | High Efficiency Fault Tolerant LED Driver A8510
Wide Input Voltage Range, High Efficiency Fault Tolerant LED Driver
Features and Benefits
• Integrated 2 MHz capable boost converter with 60 V DMOS switch with OVP protection
• Sync function to synchronize boost converter switching frequencies up to 2.3 MHz
• LED current up to 40 mA per Allegro led | | |
5 | A8512 | LED Backlight Driver
A8512
LED Backlight Driver for Medium/Large Displays
Features and Benefits
▪ Six individual current sinks capable of 80 mA each ▪ Fixed frequency current mode control with integrated gate driver ▪ 300 kHz to 1 MHz adjustable switching frequency ▪ Controlled startup usin Allegro Micro Systems driver | | |
6 | A8514 | High Efficiency Fault Tolerant LED Driver A8514
Wide Input Voltage Range, High Efficiency Fault Tolerant LED Driver
Features and Benefits
• AEC-Q100 Qualified • Wide input voltage range of 5 to 40 V for start/stop, cold
crank and load dump requirements • Fully integrated LED current sinks and boost converter
with 60 V DMOS • Sync f Allegro led | | |
7 | A8530 | Ultracompact 6-Channel Backlight and Flash/Torch White LED Driver A8530
Ultracompact 6-Channel Backlight and Flash/Torch White LED Driver
Features and Benefits
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Proprietary adaptive control scheme (1×, 1.5×, 2×) 0.5% typical LED current matching 2 separate serial interfaces for dimming control Drives up to 6 white LEDs (4 Allegro MicroSystems led | |
Esta página es del resultado de búsqueda del A8530. Si pulsa el resultado de búsqueda de A8530 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |