|
|
Número de pieza | A1301 | |
Descripción | Continuous-Time Ratiometric Linear Hall Effect Sensor ICs | |
Fabricantes | Allegro MicroSystems | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de A1301 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! A1301 and A1302
Continuous-Time Ratiometric Linear Hall Effect Sensor ICs
FEATURES AND BENEFITS
• Low-noise output
• Fast power-on time
• Ratiometric rail-to-rail output
• 4.5 to 6.0 V operation
• Solid-state reliability
• Factory-programmed at end-of-line for optimum
performance
• Robust ESD performance
Packages:
3-Pin SOT23W (suffix LH)
3-Pin SIP (suffix UA)
Not to scale
DESCRIPTION
The A1301 and A1302 are continuous-time, ratiometric, linear
Hall-effect sensor ICs. They are optimized to accurately provide
a voltage output that is proportional to an applied magnetic
field. These devices have a quiescent output voltage that is
50% of the supply voltage. Two output sensitivity options
are provided: 2.5 mV/G typical for the A1301, and 1.3 mV/G
typical for the A1302.
The Hall-effect integrated circuit included in each device
includes a Hall circuit, a linear amplifier, and a CMOS Class A
output structure. Integrating the Hall circuit and the amplifier
on a single chip minimizes many of the problems normally
associated with low voltage level analog signals.
High precision in output levels is obtained by internal gain
and offset trim adjustments made at end-of-line during the
manufacturing process.
These features make the A1301 and A1302 ideal for use in
position sensing systems, for both linear target motion and
rotational target motion. They are well-suited for industrial
applications over extended temperature ranges, from –40°C
to 125°C.
Two device package types are available: LH, a 3-pin SOT23W
type for surface mount, and UA, a 3-pin ultramini SIP for
through-hole mount. They are lead (Pb) free (suffix, –T) with
100% matte tin plated leadframes.
V+
VCC
CBYPASS
A1301-DS, Rev. 21
To all subcircuits
Amp
Out
Gain
GND
Offset
Trim
Control
Functional Block Diagram
VOUT
1 page A1301 and
A1302
Continuous-Time Ratiometric
Linear Hall Effect Sensor ICs
TYPICAL CHARACTERISTICS
(30 pieces, 3 fabrication lots)
1301 Device Sensitivity vs. Ambient Temperature
2.65
2.60
UA Package
2.55
2.50
LH Package
2.45
2.40
2.35
–50 –25
0 25 50 75 100 125 150
Temperature (°C)
1302 Device Sensitivity vs. Temperature
1.40
1.38
UA Package
1.36
1.34
1.32
1.30
1.28 LH Package
1.26
1.24
-50 -25 0
25 50 75 100 125 150
Temperature (°C)
1301 Device VOUTQ vs. Ambient Temperature
2.60
2.55
2.50
2.45
2.40
–50 –25
0 25 50 75 100 125 150
Temperature (°C)
1301 Device Sensitivity vs. Supply Voltage
3.5
3.0
2.5
2.0
1.5
4.5
5.0 5.5
Supply Voltage (V)
6.0
2.60
1302 Device VOUTQ vs. Ambient Temperature
2.55
2.50
2.45
2.40
–50 –25
0 25 50 75 100 125 150
Temperature (°C)
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
4.5
1302 Device Sensitivity vs. Supply Voltage
5.0 5.5
Supply Voltage (V)
6.0
Continued on the next page...
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
5
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet A1301.PDF ] |
Número de pieza | Descripción | Fabricantes |
A1300 | PNP Transistor - 2SA1300 | Toshiba Semiconductor |
A1301 | Continuous-Time Ratiometric Linear Hall Effect Sensor ICs | Allegro MicroSystems |
A1302 | Continuous-Time Ratiometric Linear Hall Effect Sensor ICs | Allegro MicroSystems |
A1303 | PNP Transistor - 2SA1303 | Sanken electric |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |