|
|
Número de pieza | AN165 | |
Descripción | EMI REDUCTION TECHNIQUES | |
Fabricantes | Crystal | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AN165 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! www.DataSheet4U.com
AN165
Application Note
CS4297A/CS4299 EMI REDUCTION TECHNIQUES
1. INTRODUCTION
The CS4297A and CS4299 AC ’97 audio codecs
are based on a new and faster fabrication process,
and certain precautions in the analog I/O circuitry
may be required to prevent 49.1 MHz common-
mode radiation. Note that 49.1 MHz is 2 times the
CS4297A internal clock frequency of 24.576 MHz.
2. DESCRIPTION
Common-mode radiation is the result of undesired
voltage drops due to voltage differentials in the I/O
ground system. The CS4297A clock transitions re-
sult in a rush of current that may induce the digital
ground plane to "bounce". When external speaker
or microphone cables are connected to the audio
system, any common-mode voltage potential on
the analog ground will drive the cables (antennas)
and radiate electric fields. The magnitude of the
electric fields are the result of the I/O cable length
(the antenna) and the magnitude of common-mode
current.
3. EMI SHUNTING CIRCUIT
The key to reducing common-mode emissions is to
add decoupling (called shunting) at the audio I/O
connectors. The shunt capacitors must be connect-
ed to a "clean" (free of digital noise) I/O ground.
The recommended EMI shunting circuit is shown
in the following diagram, and includes ferrite beads
and 1000 pF NPO capacitors. The ferrite bead val-
ues are typically selected for an impedance of
100 ohms at 100 MHz. The ferrite bead and capac-
itor circuit create a low pass filter to attenuate fre-
quencies above 1.6 MHz.
Additionally, the following PCB layout checklist
includes generally accepted practices for reducing
both differential-mode and common-mode radiated
emissions, while maintaining audio quality.
P.O. Box 17847, Austin, Texas 78760
(512) 445 7222 FAX: (512) 445 7581
http://www.cirrus.com
Copyright © Cirrus Logic, Inc. 2000
(All Rights Reserved)
MAY ‘00
AN165REV1
1
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet AN165.PDF ] |
Número de pieza | Descripción | Fabricantes |
AN16003A-K | Plasma Display Panel IC | ETC |
AN16021AA-K | Pin Arrangement / Function | ETC |
AN1607 | ITC122 low voltage micro to motor interface | Motorola Semiconductors |
AN165 | EMI REDUCTION TECHNIQUES | Crystal |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |