SG-10 Datasheet PDF - Epson Company
Part Number | SG-10 | |
Description | SIP LOW/MEDIUM-FREQUENCY CRYSTAL OSCILLATOR | |
Manufacturers | Epson Company | |
Logo | ||
There is a preview and SG-10 download ( pdf file ) link at the bottom of this page. Total 1 Pages |
Preview 1 page No Preview Available ! www.DataSheet4U.com
Crystal oscillator
SIP LOW/MEDIUM-FREQUENCY CRYSTAL OSCILLATOR
SG-10
Products number
Q3110 000xx xxx 00
• Low current consumption.
• Small suited to high-density mounting.
• Mountable on a standard printed circuit board.
• Cylindrical low/medium-frequency crystal unit builtin, thus assuring high
reliability.
Actual size
Specifications (characteristics)
Item Symbol
Output frequency range
f0
Max. supply voltage VDD-GND
Power source voltage
Operating voltage VDD
Storage temperature TSTG
Temperature range
Operating temperature TOPR
Frequency tolerance
∆f/f0
Frequency temperature characteristics
Frequency voltage characteristics
Current consumption
lOP
Duty
tW/t
Output voltage
Output load condition (fan out)
Output rise time
Output fall time
VOH
VOL
N/CL
tTLH
tTHL
Specifications
10.0000 Hz to 153.6000 kHz
-0.3 V to +7.0 V
4.5 V to 5.5 V
-55 °C to +125 °C
-10 °C to +70 °C
A: ±10 x 10-6 B: ±50 x 10-6
+10 x 10-6 / -120 x 10-6
±10 x 10-6 Max.
0.5 mA Max..
40 % to 60 %
(except for cases of 1/3 and 1/ 5 divided frequency.)
VDD -1.0 V Min.
0.4 V Max.
1 TTL Max./15 pF Max.
60 ns Max.
50 ns Max.
Oscillation start up time
Aging
Shock resistance
tOSC
fa
S.R.
1 s Max.
±5 x 10-6/year Max.
±5 x 10-6 Max.
Remarks
For output frequency, see the table below
Stored as bare product after unpacking
VDD=5 V Ta=+25 °C
-10 °C to +70 °C, taking Ta=+25 °C as the reference
No load condition
1/2 VDD or 1.4 V level
IOH= -40 µA
IOL=1.6 mA
TTL load/C-MOS load
For more than 1 ms until VDD=0 V→4.5 V.
Time at 4.5 V to be 0 s
Ta=+25 °C ±3 °C, VDD=5 V, first year
Three drops on a hard board from 750 mm or excitation test
with 29400 m/s2 x 0.3 ms x 1/2 sine wave in 3 directions
Unless otherwise stated, characteristics (specifications) shown in the above table are based on the rated operating temperature and voltage condition.
External dimensions
4.6 Max.
31
DataSheet4 U .com
0.25
(Unit: mm)
Output frequency table
16.0 Max.
Oscillation source 32.768 kHz,60.000 kHz, 96.000 kHz, 100.000 kHz,
153.600 kHz
E SG-10 B
32.768 kHz
0131A
0.5
#1
#2
#3
NO. Pin terminal
1 GND
2.1 2.54 2.54
2 OUT
3 VDD
Divided frequency Oscillation source frequency x (any arbitrary one of 1/1, 1/2, 1/3,
output
1/4, 1/5, 1/6, 1/12) x (any arbitrary one of 1/1, 1/10, 1/100,
(calculation method) 1/1000). Over 10.0 Hz range.
For frequencies other than the above, please consult us. (Min. order lot 10000 pcs.)
Output frequency example
32.768 kHz , 60.000 kHz , 96.000 kHz,
Oscillation source 100.000 kHz ,153.600 kHz
10.000 Hz, 50.000 Hz, 100.000 Hz, 1.000 kHz,
Divided frequency 4.800 kHz , 9.600 kHz, 19.200 kHz , 38.400 kHz,
50.000 kHz , 76.800 kHz
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SG-10 electronic component. |
Information | Total 1 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ SG-10.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
SG-10 | The function is SIP LOW/MEDIUM-FREQUENCY CRYSTAL OSCILLATOR. Epson Company | |
SG-103 | The function is Photointerrupters(Reflective). KODENSHI KOREA CORP | |
SG-105 | The function is Photointerrupters(Reflective). KODENSHI KOREA CORP | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
SG-1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |