|
|
PDF CX1174 Data sheet ( Hoja de datos )
| Número de pieza | CX1174 | |
| Descripción | Deuterium-Filled Ceramic Thyratron | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CX1174 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
E2V Technologies
CX1174
Deuterium-Filled Ceramic Thyratron
The data to be read in conjunction with the Hydrogen
Thyratron Preamble.
ABRIDGED DATA
Deuterium-filled tetrode thyratron with ceramic/metal
envelope, featuring low jitter, firing time and drift. Suitable for
switching high power at high pulse repetition rates or for
switching long pulses. A reservoir operating from a separate
heater supply is incorporated.
Peak forward anode voltage . . . . . . 40 kV max
Peak anode current (see Ratings) . . . . . 6.0 kA max
Average anode current . . . . . . . . 4.0 A max
GENERAL
Electrical
Cathode (connected internally to
one end of heater) . . . . . . . . . oxide coated
Cathode heater voltage
.
.
.
.
.
.
.
.
6.3
+
7
0.3
0.0
V
Cathode heater current . . . . . . . 40
A
Reservoir heater voltage (see note 1) . . . . 5.0
V
Reservoir heater current . . . . . . . 10
A
Tube heating time (minimum) . . . . . 15
min
Anode to grid 2 capacitance . . . . . 40
pF
Mechanical
Seated height . . . . . 212.7 mm (8.375 inches) max
Clearance required below
mounting flange . . . . . 57.15 mm (2.250 inches) min
Overall diameter
(mounting flange) . . . 152.4 mm (6.000 inches) nom
Net weight . . . . . . . 3.5 kg (7 3/4 pounds) approx
Mounting position (see note 2) . . . . . . . . . any
Tube connections . . . . . . . . . . . see outline
Cooling . . . . . . . . . . . liquid or forced-air
Liquid . . . . . . . . . . oil or coolant immersion
Forced-air . . . . . . . . . . . . . . see below
Cooling by oil or coolant immersion is preferred in view of the
high voltages present. Further information is contained in the
relevant section of the Preamble.
The tube may be cooled by forced-air directed mainly onto the
base, and the metal/ceramic envelope should be maintained
below the maximum rated temperature. An air flow of at least
2.83 m3/min (100 ft3/min), depending on the mechanical
layout, will be necessary to keep the tube operating
temperatures under the limits specified below.
In addition to 300 W of heater power, the tube dissipates from
100 W per ampere average anode current, rising to 300 W/A at
the highest rates of rise and fall of anode current.
The cathode end of the tube must be cooled whenever heater
voltages are applied, since the cathode flange will reach a
temperature of 120 8C above ambient in the absence of cooling.
Envelope temperature:
ceramic, anode and grid . . . . . . 150
cathode flange and base . . . . . . 120
8C max
8C max
E2V Technologies Limited, Waterhouse Lane, Chelmsford, Essex CM1 2QU England Telephone: +44 (0)1245 493493 Facsimile: +44 (0)1245 492492
e-mail: [email protected] Internet: www.e2vtechnologies.com Holding Company: Redwood 2002 Limited
E2V Technologies Inc. 4 Westchester Plaza, PO Box 1482, Elmsford, NY10523-1482 USA Telephone: (914) 592-6050 Facsimile: (914) 592-5148
e-mail: [email protected]
# E2V Technologies Limited 2002
A1A-CX1174 Issue 5, October 2002
DataSheet4 U .com
527/5630
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet CX1174.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CX1174 | Deuterium-Filled Ceramic Thyratron | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |