DataSheet39.com

What is NT256D64S88A0G?

This electronic component, produced by the manufacturer "Nanya Technology", performs the same function as "256MB DIMM".


NT256D64S88A0G Datasheet PDF - Nanya Technology

Part Number NT256D64S88A0G
Description 256MB DIMM
Manufacturers Nanya Technology 
Logo Nanya Technology Logo 


There is a preview and NT256D64S88A0G download ( pdf file ) link at the bottom of this page.





Total 14 Pages



Preview 1 page

No Preview Available ! NT256D64S88A0G datasheet, circuit

NT256D64S88A0G
256MB : 32M x 64
omPC2100 / PC1600 Unbuffered DIMM
U.c184pin One Bank Unbuffered DDR SDRAM MODULE Based on DDR266/200 32Mx8 SDRAM
eet4Features
h• 184-Pin Unbuffered 8-Byte Dual In-Line Memory Module
S• 32Mx64 Double Data Rate (DDR) SDRAM DIMM
ta• Performance :
a PC1600
PC2100
.DSpeed Sort
- 8B - 75B - 7K
wDIMM CAS Latency
2 2.5 2
wf CK Clock Frequency
100 133 133
w t CK Clock Cycle
10 7.5 7.5
Unit
MHz
ns
• DRAM DLL aligns DQ and DQS transitions with clock transitions.
Also aligns QFC transitions with clock during Read cycles
• Address and control signals are fully synchronous to positive
clock edge
• Programmable Operation:
- DIMM CAS Latency: 2, 2.5
- Burst Type: Sequential or Interleave
- Burst Length: 2, 4, 8
f DQ DQ Burst Frequency 200 266 266
• Intended for 100 MHz and 133 MHz applications
• Inputs and outputs are SSTL-2 compatible
m• VDD = 2.5Volt ± 0.2, VDDQ = 2.5Volt ± 0.2
o• Single Pulsed RAS interface
• SDRAMs have 4 internal banks for concurrent operation
.c• Module has one physical bank
• Differential clock inputs
• Data is read or written on both clock edges
MHz
- Operation: Burst Read and Write
• Auto Refresh (CBR) and Self Refresh Modes
• Automatic and controlled precharge commands
• 13/10/2 Addressing (row/column/bank)
• 7.8 µs Max. Average Periodic Refresh Interval
• Serial Presence Detect
• Gold contacts
• SDRAMs in 66-pin TSOP Type II Package
t4UDescription
NT256D64S88A0G is an unbuffered 184-Pin Double Data Rate (DDR) Synchronous DRAM Dual In-Line Memory Module (DIMM),
eorganized as a one-bank high-speed memory array. The 32Mx64 module is a single-bank DIMM that uses eight 32Mx8 DDR
eSDRAMs in 400 mil TSOP packages. The DIMM achieves high-speed data transfer rates of up to 266MHz. The DIMM is intended for use
hin applications operating from 100 MHz to 133 MHz clock speeds with data rates of 200 to 266 MHz. Clock enable CKE0 controls all
Sdevices on the DIMM.
taPrior to any access operation, the device CAS latency and burst type/ length/operation type must be programmed into the DIMM by
address inputs A0-A12 and I/O inputs BA0 and BA1 using the mode register set cycle.
aThese DIMMs are manufactured using raw cards developed for broad industry use as reference designs. The use of these common
design files minimizes electrical variation between suppliers.
.DThe DIMM uses serial presence detects implemented via a serial EEPROM using the two-pin IIC protocol. The first 128 bytes of serial PD
data are programmed and locked during module assembly. The last 128 bytes are available to the customer.
wAll NANYA 184 DDR SDRAM DIMMs provide a high-performance, flexible 8-byte interface in a 5.25” long space-saving footprint.
wwOrdering Information
Part Number
NT256D64S88A0G-7K
NT256D64S88A0G –75B
NT256D64S88A0G –8B
Preliminary 08 / 2001
Speed
143MHz (7ns @ CL = 2.5 )
133MHz (7.5ns @ CL= 2 )
133MHz (7.5ns @ CL= 2.5 )
100MHz (10ns @ CL = 2 )
125MHz (8ns @ CL = 2.5 )
100MHz (10ns @ CL = 2 )
.comPC2100
t4UPC2100
heePC1600
Organization
32Mx64
Leads
Gold
Power
2.5V
w.DataS1
w © NANYA TECHNOLOGY CORP.
wNANYA TECHNOLOGY CORP. reserves the right to change Products and Specifications without notice.

line_dark_gray
NT256D64S88A0G equivalent
NT256D64S88A0G
256MB : 32M x 64
PC2100 / PC1600 Unbuffered DIMM
Serial Presence Detect -- Part 1 of 2
32Mx64 SDRAM DIMM based on 32Mx8, 4Banks, 8K Refresh, 2.5V DDR SDRAMs with SPD
Byte
Description
SPD Entry Value
Serial PD Data Entry (Hexadecimal)
DDR266A DDR266B DDR200 DDR266A DDR266B DDR200
-7K -75B -8B -7K -75 -8B
Number of Serial PD Bytes Written during
0
Production
128
80
1 Total Number of Bytes in Serial PD device
256
08
2 Fundamental Memory Type
SDRAM DDR
07
3 Number of Row Addresses on Assembly
13
0D
4 Number of Column Addresses on Assembly
10
0A
5 Number of DIMM Bank
1 01
6. Data Width of Assembly
X64 40
7 Data Width of Assembly (cont’)
X64
00
8 Voltage Interface Level of this Assembly
SSTL 2.5V
04
9 DDR SDRAM Device Cycle Time at CL=2.5
7ns
7.5ns
8ns
70
75
80
DDR SDRAM Device Access Time from
10
0.75ns 0.75ns
0.8ns
75
75
80
Clock at CL=2.5
11 DIMM Configuration Type
Non-Parity
00
12 Refresh Rate/Type
SR/1x(7.8us)
82
13 Primary DDR SDRAM Width X8 08
14 Error Checking DDR SDRAM Device Width
N/A
00
DDR SDRAM Device Attr: Min CLk Delay,
15
Random Col Access
1 Clock
01
DDR SDRAM Device Attributes:
16
Burst Length Supported
2,4,8
0E
DDR SDRAM Device Attributes: Number of
17
Device Banks
4
04
DDR SDRAM Device Attributes: CAS
18
Latencies Supported
2/2.5
2/2.5
2/2.5
0C
0C
0C
19 DDR SDRAM Device Attributes: CS Latency
0
01
20 DDR SDRAM Device Attributes: WE Latency
1
02
21 DDR SDRAM Device Attributes:
Differential Clock
20
22 DDR SDRAM Device Attributes: General
+/-0.2V Voltage Tolerance
00
23 Minimum Clock Cycle at CL=2
7.5ns
10ns
10ns
75
A0
A0
Maximum Data Access Time from Clock at
24
0.75ns 0.75ns
0.8ns
75
75
80
CL=2
25 Minimum Clock Cycle Time at CL=1
N/A
00
Maximum Data Access Time from Clock at
26
CL=1
N/A
00
27 Minimum Row Precharge Time(tRP)
20ns
20ns
20ns
50
50
50
Minimum Row Active to Row Active delay
28
15ns
15ns
15ns
3C
3C
3C
(tRRD)
29 Minimum RAS to CAS delay (tRCD)
20ns
20ns
20ns
50
50
50
30 Minimum RAS Pulse Width (tRAS)
45ns
45ns
50ns
2D
2D
32
31 Module Bank Density
256MB
40
Address and Command Setup Time Before
32
0.9ns
0.9ns
1.1ns
90
90
B0
Clock
Address and Command Hold Time After
33
Clock
0.9ns
0.9ns
1.1ns
90
90
B0
34 Data Input Setup Time Before Clock
0.5ns
0.5ns
0.6ns
50
50
60
35 Data Input Hold Time After Clock
0.5ns
0.5ns
0.6ns
50
50
60
36-61 Reserved
Undefined
00
62 SPD Revision
Initial
Initial
Initial
00
00
00
63 Checksum Data
8F BF 45
Note
Preliminary 08 / 2001
5
© NANYA TECHNOLOGY CORP.
NANYA TECHNOLOGY CORP. reserves the right to change Products and Specifications without notice.


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for NT256D64S88A0G electronic component.


Information Total 14 Pages
Link URL [ Copy URL to Clipboard ]
Download [ NT256D64S88A0G.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
NT256D64S88A0GThe function is 256MB DIMM. Nanya TechnologyNanya Technology

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

NT25     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search