|
|
PDF DMF-5010NB-FW-BC Data sheet ( Hoja de datos )
| Número de pieza | DMF-5010NB-FW-BC | |
| Descripción | LCD_Module | |
| Fabricantes | OPTREX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DMF-5010NB-FW-BC (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
|
No Preview Available !
t4U.comOPTREX LCD Module Technical Specification
First Edition
Dec 27, 2001
Final Revision
******
taSheeType No. DMF5010NB-FW-BC
Approved by (Production Div.)
www.Da Checked by (Quality Assurance Div.)
Checked by (Design Engineering Div.)
mPrepared by (Production Div.)
Table of Contents U.co1. General Specifications.................................................................................................................................. 2
2. Electrical Specifications............................................................................................................................... 3
t43. Optical Specifications ................................................................................................................................... 7
4. I/O Terminal...................................................................................................................................................... 9
e5. Test................................................................................................................................................................... 11
e6. Appearance Standards ............................................................................................................................... 12
7. Code System of Production Lot............................................................................................................... 15
h8. Type Number.................................................................................................................................................. 15
S9. Applying Precautions .................................................................................................................................. 15
10. Precautions Relating Product Handling................................................................................................ 16
ta11. Warranty ........................................................................................................................................................ 17
RevisionwHiwstowry .DaRev. Date
Page
Comment
DMF5010NB-FW-BC (BC) No. 2001-0309
www.DataSheet4U.comOPTREX CORPORATION
Page 1/17
1 page  
2.4.Power Supply ON/OFF Sequence
2.4.1.ON Sequence
SIGNAL
VCC
SIGNAL
(Without RESET Signal)
VEE
0≤ t
0≤ t
2.4.2.OFF Sequence
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
0≤ t
0≤t
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
SIGNAL
VCC
SIGNAL
(Without RESET Signal)
VEE
2.4.3.Reset Sequence
SIGNAL
RESET
T>250 µs
VCC
VEE
T≥50ms
Power On
T≥10 ms
T≥0 T≥50ms
Reset
Reset Cancellation
T≥0
T≥0
Power Off
LEVEL
H Level
L Level
VCC
VSS
VCC
VEE
Please maintain the above sequence when turning on and off the power supply of the
module.
If VEE is supplied to the module while internal alternate signal for LCD driving (M) is
unstable or RESET is active, DC component will be supplied to the LCD panel. This may
cause damage to the LCD module.
DMF5010NB-FW-BC (BC) No. 2001-0309
OPTREX CORPORATION
Page 5/17
5 Page 
5.Test
No change on display and in operation under the following test condition.
Conditions:
Unless otherwise specified, tests will be conducted under the following condition.
Temperature: 20±5°C
Humidity : 65±5%RH
tests will be not conducted under functioning state.
No. Parameter
Conditions
Notes
1 High Temperature Operating 50°C±2°C, 96hrs (operation state)
2 Low Temperature Operating 0°C±2°C, 96hrs (operation state)
1
3 High Temperature Storage
4 Low Temperature Storage
5 Damp Proof Test
60°C±2°C, 96hrs
-20°C±2°C, 96hrs
40°C±2°C,90~95%RH, 96hrs
2
1,2
1,2
6 Vibration Test
Total fixed amplitude : 1.5mm
Vibration Frequency : 10~55Hz
3
One cycle 60 seconds to 3 directions of X, Y, Z for
each 15 minutes
7 Shock Test
To be measured after dropping from 60cm high on
the concrete surface in packing state.
E
B
Dropping method corner dropping
F A corner : once
GD C
A
60cm
Concrete Surface
Edge dropping
B,C,D edge : once
Face dropping
E,F,G face : once
Note 1 :No dew condensation to be observed.
Note 2 :The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after removed from the test chamber.
Note 3 :Vibration test will be conducted to the product itself without putting it in a container.
DMF5010NB-FW-BC (BC) No. 2001-0309
OPTREX CORPORATION
Page 11/17
11 Page | ||
| Páginas | Total 17 Páginas | |
| PDF Descargar | [ Datasheet DMF-5010NB-FW-BC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DMF-5010NB-FW-BC | LCD_Module | OPTREX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |