DataSheet39.com

What is 7585-3.3ST?

This electronic component, produced by the manufacturer "ADD Microtech", performs the same function as " AMC7585".


7585-3.3ST Datasheet PDF - ADD Microtech

Part Number 7585-3.3ST
Description AMC7585
Manufacturers ADD Microtech 
Logo ADD Microtech Logo 


There is a preview and 7585-3.3ST download ( pdf file ) link at the bottom of this page.





Total 10 Pages



Preview 1 page

No Preview Available ! 7585-3.3ST datasheet, circuit

AMC DOC. #: AMC7585_E (LF)
Feb 2005
A®
DD MICROTECH CORP.
DESCRIPTION
The AMC7585 is a high performance low dropout regulator
rated for 5A output current with fixed 2.5V/3.3V/5.0V and
adjustable output. It is designed for use in applications requiring
low dropout characteristics over the rated current range.
On chip trimming adjusts the reference voltage to 1%. These
features are ideal for low voltage microprocessor applications
www.DataSheet4U.croemquiring a regulated 2.5V to 3.6V power supply.
In addition, the AMC7585 provides the device protections
including over current and thermal shutdown. Also, reverse
battery protection scheme limits the reverse current when the
input voltage falls below the output.
AMC7585
5A LOW DROPOUT REGULATOR
FEATURES
Input-Output differential of
typical 1.1V at 5A and low
quiescent current
Output current is excess of 5A
Fast transient response
Reverse battery protection
Short circuit protection
Internal thermal overload protection
Available in 3L plastic TO-220 and
surface mount 3L TO-263/252
packages
Pin assignment identical to EZ1585B
and LT1585A series.
APPLICATIONS
Pentium® Processor Supplies
PowerPCTM Supplies
Computer Add-On Cards
Other Applications Requiring Low
Dropout Voltage Over Rated Current.
PACKAGE PIN OUT
3.VIN
2.VOUT
1.ADJ/GND
3-Pin Plastic TO-220
(Top View)
3.VIN
2.VOUT
1.ADJ/GND
3-Pin Plastic TO-252
Surface Mount
(Top View)
AMC7585-2.5 – 2.5V Fixed
AMC7585-3.3 – 3.3V Fixed
AMC7585-5.0 – 5.0V Fixed
AMC7585-ADJ – Adjustable
3.VIN
2.VOUT
1.ADJ/GND
3.VIN
2.VOUT
1.ADJ
3-Pin Plastic TO-263 (ST)
Surface Mount
(Top View)
3-Pin Plastic TO-263-3 (ST3)
Surface Mount
(Top View)
ORDER INFORMATION
TA (OC)
T
TO-220
3-pin
ST TO-263
3-pin
TO-263-3
ST3 3-pin
TO-252
SJ 3-pin
0 to 70 AMC7585-X.XT
AMC7585-X.XST
- AMC7585-X.XSJ
0 to 70 AMC7585-X.XTF(Lead Free) AMC7585-X.XSTF(Lead Free)
- AMC7585-X.XSJF(Lead Free)
0 to 70 AMC7585-ADJT
AMC7585-ADJST
AMC7585-ADJST3
AMC7585-ADJSJ
0 to 70 AMC7585-ADJTF(Lead Free) AMC7585-ADJSTF(Lead Free) AMC7585-ADJST3F(Lead Free) AMC7585-ADJSJF(Lead Free)
Note: 1.All surface-mount packages are available in Tape & Reel. Append the letter “T” to part number (i.e.,
AMC7585-X.XSTT, AMC7585-X.XST3T, AMC7585-X.XSJT ).
2.The letter ”F” is marked for Lead Free process.
Copyright © 2002, ADD Microtech Corp.
1
www.addmtek.com

line_dark_gray
7585-3.3ST equivalent
AMC DOC. #: AMC7585_E (LF)
Feb 2005
AMC7585
5A LOW DROPOUT REGULATOR
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, VIN = VOUT + 2V, IO = 10mA. These specifications apply operating ambient temperature
range, and are for DC characteristics only. (Low duty cycle pulse testing techniques are used which maintains
junction and case temperatures equal to the ambient temperature.)
Parameter
Symbol
Test Conditions
AMC7585
Units
Min. Typ. Max.
AMC7585-2.5
Output Voltage AMC7585-3.3
AMC7585-5.0
VOUT
TA = 25 OC
TA = 25 OC
TA = 25 OC
2.475
3.267
4.950
2.500
3.300
5.000
2.525
3.333
5.050
V
www.DataSheet4U.com
AMC7585-2.5
2.460 2.500 2.540
Output Voltage AMC7585-3.3 VOUT IO = 10mA to 5A
Reference
Voltage
AMC7585-5.0
(Note 1)
AMC7585-ADJ VREF IO = 10mA to 5A, (Note 1)
Line Regulation (Note 2)
VOI (1.5V + VOUT) VIN 7V
3.247 3.300 3.353 V
4.920 5.000 5.080
1.238 1.250 1.262
1.230 1.250 1.270
V
0.04 0.2 %
Load regulation (Note 2)
VOL IO = 10mA to 5A
0.08 0.3 %
Dropout Voltage
Quiescent Current
( for AMC7585-X.X)
V (Note 3)
IO = 10mA
IO = 5A
IQ VIN 7V, IO = 10mA to 3A
1.00 1.15
1.15 1.30
8 13
V
mA
Adjust Pin Current
( for AMC7585-ADJ)
IADJ
50 120 µA
Current Limit
ICL (VIN - VOUT)=2V
Minimum Load Current (Note 4) Imin
5.1 6.8
A
5 10 mA
Ripple Rejection (Note 5)
RR
VRIPPLE = 1VPP, IO = 100mA,
fO=120Hz
60 80
dB
Note 1 Output voltage is set to be 2.5V.
Note 2: Line and load regulations are guaranteed up to maximum power dissipation determined by input/output
differential and the output current. However, the maximum power will not be available over the full
input/output voltage range.
Note 3: The specifications represent the minimum input/output voltage required to maintain 1% regulation.
Note 4: The minimum load current is the minimum current required to maintain regulation. Normally the current in
the resistor divider used to set the output voltage is selected to meet the minimum load current requirement.
Note 5: These parameters, although guaranteed, are not tested in production prior to shipment
Copyright © 2002, ADD Microtech Corp.
5
www.addmtek.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 7585-3.3ST electronic component.


Information Total 10 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 7585-3.3ST.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
7585-3.3STThe function is AMC7585. ADD MicrotechADD Microtech

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

7585     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search