1N3000B Datasheet PDF - Microsemi Corporation

Part Number 1N3000B
Description 10 WATT ZENER DIODES
Manufacturers Microsemi Corporation 
Logo Microsemi Corporation Logo 

Preview ( 4 pages )
1N3000B datasheet, circuit
1N2970 thru 1N3015B
and 1N3993 thru 1N4000A
These high power 10 W Zener diodes represented by the JEDEC
registered 1N2970 thru 1N3015B and 1N3993 thru 1N4000A series provide
voltage regulation in a selection over a 3.9 V to 200 V broad range of
voltages. They may be operated up to 10 W with adequate mounting and
heat sinking with their low thermal resistance. These Zeners are also
available in JAN, JANTX, JANTXV military qualifications. Microsemi also
offers numerous other Zener products to meet higher and lower power
IMPORTANT: For the most current data, consult MICROSEMI’s website:
JEDEC registered 1N2970 thru 1N3015B and
1N3993 thru 1N4000A
Internal solder bond construction
Hermetically sealed (welded)
Zener Voltage 3.9V to 200V.
Also available in JAN, JANTX, and JANTXV
qualifications per MIL-PRF-19500/124 by
adding the JAN, JANTX, or JANTXV prefixes to
part numbers for desired level of screening;
(e.g. JANTX1N2970B, JANTXV1N3996A, etc.
Standard polarity is anode to case (stud) for
1N2970 thru 1N3015B and cathode to case for
1N3993 thru 1N4000A
Reverse polarity is cathode to case for 1N2970
thru 1N3015B and anode to case for 1N3993
thru 1N4000A by designating R suffix, e.g.
1N2970RB, 1N3993RA, etc.
Consult factory for surface mount equivalents
Regulates voltage over a broad operating
current and temperature range
Standard voltage tolerances are +/- 5% with B
suffix, +/-10% with an A suffix, and +/-20% with
no suffix
Consult factory for +/-2% or +/-1% voltage
tolerance with a C or D suffix respectively
Reverse polarity available
Nonsensitive to ESD per MIL-STD-750 Method
Inherently radiation hard as described in
Microsemi MicroNote 050
Junction Temperatures: -65oC to +175oC
Storage Temperatures: -65oC to +200oC
DC Power Dissipation: 10 Watts
Power Derating: 80 mW/oC above 50oC
Forward Voltage @ 2.0 A: 1.5 Volts
junction to case (stud)
Solder temperatures: 260 oC for 10 s (max)
CASE: Industry Standard DO-4, (DO-203AA), 7/16”
Hex, stud with 10-32 threads, welded, hermetically
sealed metal and glass
FINISH: All external surfaces are corrosion
resistant and terminal solderable
POLARITY: 1N3993 – 1N4000: Std. Polarity is
cathode to stud. Reverse polarity (anode to stud)
indicated by suffix “R”
1N2970 – 1N3015: Std. Polarity is anode to stud.
Reverse polarity indicated by suffix “R”
WEIGHT: 7.5 grams
MOUNTING HARDWARE: Consult factory for
optional insulator, bushing solder terminal,
washers, and nut
See package dimension on last page
Copyright 2003
11-12-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1

No Preview Available !

1 page

Information Total 4 Pages
Download[ 1N3000B.PDF Datasheet ]

Share Link :

Electronic Components Distributor

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Element14 Chip One Stop

Featured Datasheets

Part NumberDescriptionManufacturers
1N3000The function is (1N3000 - 1N3015) 10W Zener Diodes.America Semiconductor
America Semiconductor
1N3000The function is Diode Zener Single 62V 20% 10W 2-Pin DO-4.New Jersey Semiconductor
New Jersey Semiconductor
1N3000AThe function is Diode Zener Single 62V 10% 10W 2-Pin DO-4.New Jersey Semiconductor
New Jersey Semiconductor

Quick jump to:

1N30  1N4  2N2  2SA  2SC  74H  ADC  BC  BF  BU  CXA  HCF  IRF  KA  KIA  LA  LM  MC  NE  ST  STK  TDA  TL  UA is an Online Datasheet PDF Search Site.
It offers a large amount of data sheet, You can free PDF files download.
The updated every day, always provide the best quality and speed.

keyword : 1N3000B schematic, equivalent, pinout, replacement, circuit, manual   |  2020   |  Privacy Policy |  Contact Us  | New  |  Search