1N4007 Datasheet PDF - Vishay Siliconix
|Description||100V, 1A, General Purpose Plastic Rectifier|
When it comes to rectification diodes, the 1N4007 and 1N4148 are two commonly used models. While they may seem similar, there are significant differences in their properties that can impact their suitability for different applications. Here's a summary of the differences, pros, and cons of each diode:
The 1N4007 is a rectification diode that is designed for high-voltage applications, typically up to 1000V. It has a maximum current rating of 1A and a forward voltage drop of around 0.7V. The 1N4007 is a relatively slow diode, meaning that it takes a longer time to switch on and off.
Pros: High voltage rating High current capability Lower cost compared to other high-voltage rectifier diodes
Cons: Slow switching speed Higher forward voltage drop compared to other rectifier diodes Larger size compared to other rectifier diodes
The 1N4148 is a signal diode that is designed for lower voltage applications, typically up to 100V. It has a maximum current rating of 200mA and a forward voltage drop of around 0.6V. The 1N4148 is a fast diode, meaning that it switches on and off quickly. Pros: Fast switching speed Low forward voltage drop Small size Cons:
There is a preview and 1N4007 download ( pdf file ) link at the bottom of this page.
Total 5 Pages
Preview 1 page
No Preview Available !
1N4001 thru 1N4007
Vishay General Semiconductor
General Purpose Plastic Rectifier
50 V to 1000 V
IFSM (8.3 ms sine-wave)
IFSM (square wave tp = 1 ms)
VF 1.1 V
IR 5.0 μA
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes application.
• These devices are not AEC-Q101 qualified.
Case: DO-204AL, molded epoxy body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 75 °C
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
VRRM 50 100 200 400 600 800 1000 V
70 140 280 420 560 700 V
VDC 50 100 200 400 600 800 1000 V
Non-repetitive peak forward
surge current square waveform
TA = 25 °C (fig. 3)
tp = 1 ms
tp = 2 ms
tp = 5 ms
Maximum full load reverse current, full cycle
average 0.375" (9.5 mm) lead length TL = 75 °C
Rating for fusing (t < 8.3 ms)
Operating junction and
storage temperature range
- 50 to + 150
(1) For device using on bridge rectifier appliaction
Document Number: 88503 For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Legal Disclaimer Notice
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
1 Document Number: 91000
Preview 5 Page
On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 1N4007 electronic component.
|Information||Total 5 Pages|
|Link URL||[ Copy URL to Clipboard ]|
|Product Image |
and Detail view
1. 1000V, Silicon Rectifier - Panjit
[ Learn More ]
|Download||[ 1N4007.PDF Datasheet ]|
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. They offer a wide range of electronic components, including semiconductors, resistors, capacitors, connectors, and many others. Electronic components distributors play a crucial role in the electronics industry by providing easy access to the components. They help customers to save time and money by providing a one-stop-shop for all their component needs.
|SparkFun Electronics||Allied Electronics||DigiKey Electronics||Arrow Electronics|
|Mouser Electronics||Adafruit||Newark||Chip One Stop|
|1N4000||The function is 10 WATT ZENER DIODES.|
|1N4000||The function is Zener Diode ( Rectifier ).|
|1N4000||The function is 10W Zener Diodes.|
Semiconductors commonly used in industry:
1N4148 |   BAW56 | 1N5400 | NE555 | LM324 | BC327 | IRF840 | 2N3904 |
Quick jump to: