|
|
Número de pieza | AZ833 | |
Descripción | MICROMINIATURE POLARIZED RELAY | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AZ833 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! AZ833
MICROMINIATURE
POLARIZED RELAY
FEATURES
• Microminiature size: up to 50% less board area than
previous generation telecom relays
• High dielectric and surge voltage:
2.5 KV surge (per Bellcore TA–NWT–001089)
1.5 KV surge (per FCC Part 68)
1,000 Vrms, open contacts
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal
switching
• Epoxy sealed for automatic wave soldering and
cleaning
• UL and CSA approval pending
• All plastics meet UL94 V–O, 30 min. oxygen index
CONTACTS
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage: 220 VDC or 250 VAC
Rated Load
UL/CSA
(Pending)
0.5 A at 125 VAC
2.0 A at 30 VDC
0.3 A at 110 VDC
Material
Silver nickel gold plated
Silver palladium available upon request
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
79 mW
1.0 W at 20°C (68°F)
0.78 W at 40°C (104°F)
At nominal coil voltage
18°C (32°F)
Temperature
Max. 110°C (230°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
1 x 105 at 0.5 A, 125 VAC, resistive
2 x 105 at 1.0 A, 30 VDC, resistive
Operate Time
(typical)
Release Time (typical)
3 ms at nominal coil voltage
2 ms at nominal coil voltage
(with no coil suppression)
Bounce (typical)
At 10 mA contact current
1 ms at operate or release
Dielectric Strength
(at sea level)
See table
Dropout
Greater than 10% of nominal coil voltage
Insulation Resistance 109 ohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 110°C (230°F)
Vibration
Operational, 35 g, 10–1000 Hz
Shock
Operational, 50 g min., 11 ms
Non-destructive, 150 g min., 11 ms
Max. Solder Temp.
Temp./Time
See soldering profile
Max. Solvent Temp.
Max. Immersion Time
Weight
80°C (176°F)
30 seconds
2.3 grams
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected]
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
1998-12-15
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet AZ833.PDF ] |
Número de pieza | Descripción | Fabricantes |
AZ830 | (AZ830) Polarized DIP Relay Single Side Stable | American Zettler |
AZ830-2C-24DSE | (AZ830) Polarized DIP Relay Single Side Stable | American Zettler |
AZ830-2C-xxxx | (AZ830) Polarized DIP Relay Single Side Stable | American Zettler |
AZ831 | (AZ831 / AZ821) SUBMINIATURE DIP RELAY | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |