8C443 Datasheet PDF - Mitel Networks Corporation
Part Number | 8C443 | |
Description | PIN/Preamp(Datacom/ Telecom) | |
Manufacturers | Mitel Networks Corporation | |
Logo | ||
There is a preview and 8C443 download ( pdf file ) link at the bottom of this page. Total 9 Pages |
Preview 1 page No Preview Available ! PRODUCT INFORMATION
1300nm 8C443
1550nm PIN/Preamp
Datacom, Telecom
PRELIMINARY/
This device consists of a PIN photo-
diode and a transimpedance amplifier
assembled in a TO-46 package. It is
designed for FDDI, ATM and
SDH/Sonet up to 155 Mbps. The
AGC (Automatic Gain Control)
ensures a wide dynamic range. Its
double-lens optical system is
designed for single-mode fiber as
well as for multimode fiber with core
diameter up to 62.5µm.
Ø4.7
Ø1.5
0.6
3.7
14
0.4
____
DATA OUT
VDD DATA OUT
CASE,
VSS
2.5
5.4
BOTTOM VIEW
TO-46 Package With Lens
Optical and Electrical Characteristics (25°C Case Temperature)
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
Responsivity, single ended R
differential
100 kV/W =1300 nm
200 Note 1
Output Voltage
(differential, peak to peak)
Vo
1.2 V
Bandwidth
(3dBel )
fc 140 MHz Pf =1 µW
Noise-Equivalent Power NEP
15 nW =1300 nm
Sensitivity (BER 10-9)
Dynamic Range
S -39
36 40
dBm
=1300 nm
Extinction Ratio=0
dB
Output Resistance Ro 50 ⍀
(differential)
Power Supply Current
IDD
32 40 mA
Operating Conditions: See table below. Fiber: Single-mode to multimode 62.5/125µm.
Note 1: Pf =1 µW average power at 10MHz/50% duty cycle.
Absolute Maximum Ratings
PARAMETER
SYMBOL MiN. MAX. UNIT
Supply Voltage
VDD-VSS 0 6.0 V
Operating Temperature
Storage Temperature
Top -40 85 °C
Tstg -55 125 °C
Recommended Operating Conditions
PARAMETER
SYMBOL
MIN. TYP.
MAX.
UNIT
Supply Voltage
VDD-VSS 4.5 5.0 5.25 V
Output Differential Load
RL 1 3
k⍀
VDD
Data out
____
Data out
VSS
13451.11 1998-02-04
Functional schematic
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia:
Tel (65) 293 5312 Fax (65) 293 8527
|
|
PRODUCT INFORMATION
SMA-2A
Package
Emitter or Detector in SMA Package
Mitel emitters and detectors can be
provided in this low-profile SMA
package. The device is electrically
isolated from the SMA receptacle to
facilitate electrical connection. And
optimum fiber-coupled power or
responsivity is ensured by active
alignment against the fiber.
Absolute Maximum Ratings
PARAMETER
SYMBOL
Operating & Storage Temperature
SMA-2A (Note 1)
Tstg, Top
Note 1: Temperature range can be extended to -55° to +125°C on request.
LIMIT
-40 to +85ЊC
Thermal Characteristics
PARAMETER
SYMBOL MIN. TYP. MAX.
Thermal Resistance - Infinite Heat Sink Rthcc
(Note 2)
40
Thermal Resistance - No Heat Sink
(Note 2)
Rthca
200
Thermal Resistance - On PC Board
(Note 2)
Rthca
80
Note 2: Add Rthjc for emitter or detector to estimate the total thermal resistance.
UNIT
ЊC/W
ЊC/W
ЊC/W
2-56 UNC - 2B
max.0.5
Ø3.176
+0.01
0
FIBER
END
3.9
7.2 5.7
min.12
15.2
0.006
9.8 ± 0.03
MATING FERRULE*
(not included)
All Dimensions in mm
*The fiber-coupled power/responsivity is guaranteed to meet the LED/PIN data sheet - provided a ferrule meeting this specification is used.
Mechanical Outline of Diode in SMA-2A Housing
103325 1994-09-20
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia:
Tel (65) 293 5312 Fax (65) 293 8527
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 8C443 electronic component. |
Information | Total 9 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 8C443.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
8C443 | The function is PIN/Preamp(Datacom/ Telecom). Mitel Networks Corporation | |
8C447 | The function is PIN/Preamp(Datacom/ General Purpose/ Analog Applications). Mitel Networks Corporation | |
8C449 | The function is PIN/Preamp(Datacom/ General Purpose/ Analog Applications). Mitel Networks Corporation | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
8C44
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |