|
|
PDF 85C30 Data sheet ( Hoja de datos )
| Número de pieza | 85C30 | |
| Descripción | Enhanced Serial Communications Controller | |
| Fabricantes | Advanced Micro Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 85C30 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
FINAL
Am85C30
Enhanced Serial Communications Controller
Advanced
Micro
Devices
DISTINCTIVE CHARACTERISTICS
s Fastest data rate of any Am8530
— 8.192 MHz / 2.048 Mb/s
— 10 MHz / 2.5 Mb/s
— 16.384 MHz / 4.096 Mb/s
s Low-power CMOS technology
s Pin and function compatible with other NMOS
and CMOS 8530s
s Easily interfaced with most CPUs
— Compatible with non-multiplexed bus
s Many enhancements over NMOS Am8530H
— Allows Am85C30 to be used more effectively in
high-speed applications
— Improves interface capabilities
s Two independent full-duplex serial channels
s Asynchronous mode features
— Programmable stop bits, clock factor, character
length and parity
— Break detection/generation
— Error detection for framing, overrun, and parity
s Synchronous mode features
— Supports IBM® BISYNC, SDLC, SDLC Loop,
HDLC, and ADCCP Protocols
GENERAL DESCRIPTION
AMD’s Am85C30 is an enhanced pin-compatible ver-
sion of the popular Am8530H Serial Communications
Controller. The Enhanced Serial Communications
Controller (ESCC) is a high-speed, low-power, multi-
protocol communications peripheral designed for use
with 8- and 16-bit microprocessors. It has two independ-
ent,full-duplex channels and functions as a serial-to-
parallel, parallel-to-serial converter/controller. AMD’s
proprietary enhancements make the Am85C30 easier
to interface and more effective in high-speed applica-
tions due to a reduction in software burden and the elimi-
nation of the need for some external glue logic.
The Am85C30 is easy to use due to a variety of sophisti-
cated internal functions, including on-chip baud rate
— Programmable CRC generators and checkers
— SDLC/HDLC support includes frame control,
zero insertion and deletion, abort, and residue
handling
s Enhanced SCC functions support high-speed
frame reception using DMA
— 14-bit byte counter
— 10 × 19 SDLC/HDLC Frame Status FIFO
— Independent Control on both channels
— Enhanced operation does not allow special
receive conditions to lock the 3-byte DATA
FIFO when the 10 × 19 FIFO is enabled
s Local Loopback and Auto Echo modes
s Internal or external character synchronization
s 2-Mb/s FM encoding transmit and receive
capability using internal DPLL for 16.384-MHz
product
s Internal synchronization between RxC to PCLK
and TxC to PCLK
— This allows the user to eliminate external syn-
chronization hardware required by the NMOS
device when transmitting or receiving data at
the maximum rate of 1/4 PCLK frequency
generators, digital phase-locked loops, and crystal
oscillators, which dramatically reduce the need for ex-
ternal logic. The device can generate and check CRC
codes in any SYNC mode, and can be programmed to
check data integrity in various modes. The ESCC also
has facilities for modem controls in both channels. In ap-
plications where these controls are not needed, the mo-
dem controls can be used for general-purpose I/O.
This versatile device supports virtually any serial data
transfer application such as networks, modems, cas-
settes, and tape drivers. The ESCC is designed for non-
multiplexed buses and is easily interfaced with most
CPUs, such as 80188, 80186, 80286, 8080, Z80, 6800,
68000 and MULTIBUS™.
Publication# 10216 Rev. F Amendment /0
Issue Date: June 1993
1 page  
AMD
ORDERING INFORMATION
Industrial Products
AMD industrial products are available in several packages and operating ranges. The order number (Valid Combination) is
formed by a combination of:
AM85C30
-10 J
I
OPTIONAL PROCESSING
Blank = Standard Processing
TEMPERATURE RANGE
I = Industrial (-40 to +85°C)
PACKAGE TYPE
J = 44-Pin Leadless Chip Carrier (PL 044)
SPEED OPTION
-10 = 10 MHz
-16 = 16.384 MHz
DEVICE NUMBER/DESCRIPTION
Am85C30
Enhanced Serial Communications Controller
Valid Combinations
AM85C30-10
AM85C30-16
JI
Valid Combinations
Valid Combinations list configurations planned to
be supported in volume for this device. Consult
the local AMD sales office to confirm availability of
specific valid combinations and check on newly
released combinations.
Am85C30
5
5 Page 
AMD
Am85C30
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet 85C30.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 85C30 | Enhanced Serial Communications Controller | Advanced Micro Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |