|
|
Número de pieza | MLS9033-00766 | |
Descripción | Surface Mount Frequency Synthesizer CDMA 754-779 MHz | |
Fabricantes | Tyco | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MLS9033-00766 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Surface Mount Frequency Synthesizer
MLS9033-00766
MLS9033-00766
Surface Mount Frequency Synthesizer
CDMA 754-779 MHz
Features
• Integrated VCO/PLL
• Miniature SMT Package
• Low Phase Noise
• +5V Operation
Description
The MLS9033-00766 synthesizer design integrates a high perfor-
mance buffered VCO, PLL circuit and discrete loop filter in a
surface mount package. The SMT packaging provides electrical
shielding, easy PCB assembly and repeatable performance. The
synthesizer is designed for use in CDMA base stations and is
optimised for coverage of the cellular Rx band, 70 MHz IF, 10
kHz, step size and low phase noise.
12 Lead Package
12 11 10 9 8 7 DETAIL A
M/ A- COM LTD
PART NO.
DATE CODE
12 34 5 6
IDENT
0.2
0.6
M/A-COM synthesizers are manufactured in an ISO 9001 certi-
fied facility, incorporating surface mount assembly and automated
electrical testing. This ensures consistent electrical performance
and quality over volume production quantities.
1.8
2.0
TYP. in 5 POSITIONS
13.6 MAX
0.8
1.0
DETAIL A
Electrical Specifications1, TA = +25°C, VCC = +5V , ∆F = 10 kHz, FR = 15 MHz (unless otherwise stated)
Parameter
Frequency Range (FOUT)2
RF Output Power (POUT)3
Harmonic Output
Spurious Output
Phase Noise4
Over TOP
Over TOP
Test Conditions
Phase comparison frequency (FOUT ± ∆F)
Reference breakthrough (FOUT ± FR)
SSB at 1 kHz offset from carrier
Units
MHz
dBm
dBc
dBc
dBc
dBc/Hz
Min.
754
-3.0
Typ.
-18
-73
-85
-82
Max.
779
+3.0
-15
-63
-74
SSB at 10 kHz offset from carrier
dBc/Hz
-107
SSB at 100 kHz offset from carrier
dBc/Hz
-126
-121
SSB at 300 kHz offset from carrier
dBc/Hz
-135
Integrated Phase Noise
300 Hz to 3 kHz bandwidth
mrad rms
10
Frequency Switching Time5,6 Over FOUT, measured to within ± 500 Hz
ms
45
VCO Supply Current (ICC1)
mA 19 23
PLL Supply Current (ICC2)
mA 8 12
VCO Supply Voltage (VCC1) Recommended operating limit
V +4.75
+5.25
PLL Supply Voltage (VCC2)
Step Size (∆F)7
Recommended operating limit
Recommended operating limit
V +4.75
+5.25
kHz 10
Reference Frequency (FR)8
0.5 to 2.0 Vpp sine wave into a.c. coupled
CMOS. Recommended operating limit
MHz
3
20
1. All specification limits are indicated values and apply over FOUT and
for 50 Ω load impedance.
2. Programming control is 3 wire serial CMOS or TTL levels, in accor-
dance with National Semiconductor LMX 1511.
3. Output power window includes variation over operating temperature
range (TOP) -40°C to +85°C and output frequency range (FOUT).
4. See plot for typical phase noise at other frequency offsets.
5. See plot for typical full band switching time measured to within
other offsets from final frequency.
6. Integral PLL lock monitor output, TTL high locked, TTL low un-
locked.
7. Device designed for loop bandwidth of 150 Hz.
8. Reference frequency input impedance 10 kΩ min.
V2.00
www.macom.com
M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet MLS9033-00766.PDF ] |
Número de pieza | Descripción | Fabricantes |
MLS9033-00766 | Surface Mount Frequency Synthesizer CDMA 754-779 MHz | Tyco |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |