DataSheet39.com

What is S1117-XXPI?

This electronic component, produced by the manufacturer "AUK corp", performs the same function as "Fixed LDO Voltage Regulator".


S1117-XXPI Datasheet PDF - AUK corp

Part Number S1117-XXPI
Description Fixed LDO Voltage Regulator
Manufacturers AUK corp 
Logo AUK corp Logo 


There is a preview and S1117-XXPI download ( pdf file ) link at the bottom of this page.





Total 9 Pages



Preview 1 page

No Preview Available ! S1117-XXPI datasheet, circuit

Semiconductor
S1117-xxPI
Fixed LDO Voltage Regulator
Descriptions
The S1117 series of positive fixed regulators are designed to provide 1A with higher
efficiency than currently available devices. All internal circuitry is designed to operate
down to 700mV input to output differential and the dropout voltage is fully specified as a
function of load current. Dropout voltage of the device is 100mV at light loads and rising to
700mV at maximum output current. A second low current input is required to achieve this
dropout. The S1117 can also be used as a single supply device.
Features
Output Current of 1A
1.3V Maximum Dropout voltage at 1A Output Current
100% Thermal Limit Burn-In
Fast Transient Response
Ordering Information
Type NO.
Marking
Package Code
S1117xxPI
S1117□□PI
TO-220F
□□:Voltage Code (15:1.5V,18V:1.8V, 25:2.5V, 285:2.85V, 33:3.3V, 50:5.0V)
Outline Dimensions
unit : mm
KSI-2022-006
PIN Connections
1. GND
2. Output
3. Input
1

line_dark_gray
S1117-XXPI equivalent
S1117-xxPI
Electrical Characteristics
(TJ = 0 to 125, Cin=10uF, Cout=10uF unless otherwise specified.)
Characteristic Symbol
Test Condition
Output Voltage
Line Regulation
VOUT
VOUT
VIN = (Vout+1.5V), IOUT = 10mA, Tj = 25°C
VIN = (Vout+1.5V) to 12V
IOUT = 0 to 1000mA
(Vout+1.5V)Vin12V, IOUT=10mA
S1117-285PI
Min Typ Max
2.793
2.907
2.736 2.85 2.964
Unit
V
- 10 30 mV
Load Regulation
VOUT (VIN - Vout)=2V, 10mA IOUT1A
- 10 30 mV
Quiescent Current
IQ VIN= 10V, IOUT=0mA
- 5.5 10 mA
Dropout Voltage
VD IOUT =1000mA
- 1.2 1.3 V
Ripple Rejection
RR VIN-VOUT=3V, f=120Hz, IOUT=1000mA
60 72 - dB
Output Noise Voltage
eN f=10 to 10KHz, Tj = 25°C
- 100 -
uV
Output Current
IOUT
VIN-VOUT = 3V, Tj = 25°C
1000 1500
-
mA
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible.
Thermal effects must be taken into separately.
KSI-2022-006
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for S1117-XXPI electronic component.


Information Total 9 Pages
Link URL [ Copy URL to Clipboard ]
Download [ S1117-XXPI.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
S1117-XXPIThe function is Fixed LDO Voltage Regulator. AUK corpAUK corp
S1117-XXPICThe function is Adjustable and Fixed LDO Voltage Regulator. AUK corpAUK corp

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

S111     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search