DataSheet39.com

What is TOP202?

This electronic component, produced by the manufacturer "Power Integrations Inc.", performs the same function as "Three-terminal Off-line PWM Switch".


TOP202 Datasheet PDF - Power Integrations Inc.

Part Number TOP202
Description Three-terminal Off-line PWM Switch
Manufacturers Power Integrations Inc. 
Logo Power Integrations  Inc. Logo 


There is a preview and TOP202 download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! TOP202 datasheet, circuit

TOP200-4/14
TOPSwitch® Family
Three-terminal Off-line PWM Switch
®
Product Highlights
Low Cost Replacement for Discrete Switchers
• 20 to 50 fewer components - cuts cost, increases reliability
• Source-connected tab and Controlled MOSFET turn-on
reduce EMI and EMI filter costs
• Allows for a 50% smaller and lighter solution
• Cost competitive with linears above 5 W
Up to 90% Efficiency in Flyback Topology
• Built-in start-up and current limit reduce DC losses
• Low capacitance 700 V MOSFET cuts AC losses
• CMOS controller/gate driver consumes only 6 mW
• 70% maximum duty cycle minimizes conduction losses
Simplifies Design - Reduces Time to Market
• Supported by many reference design boards
• Integrated PWM Controller and 700 V MOSFET in a
industry standard three pin TO-220 package
• Only one external capacitor needed for compensation,
bypass and start-up/auto-restart functions
System Level Fault Protection Features
• Auto-restart and cycle by cycle current limiting functions
handle both primary and secondary faults
• On-chip latching thermal shutdown protects the entire
system against overload
Highly Versatile
• Implements Buck, Boost, Flyback or Forward topology
• Easily interfaces with both opto and primary feedback
• Supports continuous or discontinuous mode of operation
Description
The TOPSwitch family implements, with only three pins, all
functions necessary for an off-line switched mode control
system: high voltage N-channel power MOSFET with controlled
turn-on gate driver, voltage mode PWM controller with
integrated 100 kHz oscillator, high voltage start-up bias circuit,
bandgap derived reference, bias shunt regulator/error amplifier
for loop compensation and fault protection circuitry. Compared
to discrete MOSFET and controller or self oscillating (RCC)
switching converter solutions, a TOPSwitch integrated circuit
can reduce total cost, component count, size, weight and at the
same time increase efficiency and system reliability. These
AC
IN
DRAIN
SOURCE
CONTROL
TOPSwitch
Figure 1. Typical Application.
PI-1703-112995
TOPSwitch SELECTION GUIDE
ORDER
PART
NUMBER
OUTPUT POWER RANGE
FLYBACK
230 VAC or
110 VAC
w/Doubler
85-265
VAC
PFC/
BOOST
230/277
VAC
TOP200YAI*
0-25 W 0-12 W 0-25 W
TOP201YAI* 20-45 W 10-22 W 20-50 W
TOP202YAI* 30-60 W 15-30 W 30-75 W
TOP203YAI* 40-70 W 20-35 W 50-100 W
TOP214YAI* 50-85 W 25-42 W 60-125 W
TOP204YAI* 60-100 W 30-50 W 75-150 W
* Package Outline: Y03A
devices are intended for 100/110/230 VAC off-line Power
Supply applications in the 0 to 100 W (0 to 50 W universal)
range and 230/277 VAC off-line power factor correction (PFC)
applications in the 0 to 150 W range.
July 1996

line_dark_gray
TOP202 equivalent
TOP200-4/14
VIN
VIN
DRAIN
0
VOUT
0
IOUT
0
VC
0
IC 0
12
812
••• •••
81
12
812
••• •••
81
45 mA
VC(reset)
1
2
34
1
PI-1119-110194
Figure 6. Typical Waveforms for (1) Normal Operation, (2) Auto-restart, (3) Latching Shutdown, and (4) Power Down Reset.
Shutdown/Auto-restart
To minimize TOPSwitch power
dissipation, the shutdown/auto-restart
circuit turns the power supply on and off
at a duty cycle of typically 5% if an out
of regulation condition persists. Loss of
regulation interrupts the external current
into the CONTROL pin. V regulation
C
changes from shunt mode to the
hysteretic auto-restart mode described
above. When the fault condition is
removed, the power supply output
becomes regulated, V regulation returns
C
to shunt mode, and normal operation of
the power supply resumes.
Latching Shutdown
The output overvoltage protection latch
is activated by a high-current pulse into
the CONTROL pin. When set, the latch
turns off the TOPSwitch output.
Activating the power-up reset circuit by
removing and restoring input power, or
momentarily pulling the CONTROL pin
below the power-up reset threshold resets
the latch and allows TOPSwitch to
resume normal power supply operation.
V is regulated in hysteretic mode when
C
the power supply is latched off.
Overtemperature Protection
Temperature protection is provided by a
precision analog circuit that turns the
output MOSFET off when the junction
temperature exceeds the thermal
shutdown temperature (typically 145°C).
Activating the power-up reset circuit by
removing and restoring input power or
momentarily pulling the CONTROL pin
below the power-up reset threshold resets
the latch and allows TOPSwitch to
resume normal power supply operation.
V is regulated in hysteretic mode when
C
the power supply is latched off.
High-voltage Bias Current Source
This current source biases TOPSwitch
from the DRAIN pin and charges the
CONTROL pin external capacitance
(C ) during start-up or hysteretic
T
operation. Hysteretic operation occurs
during auto-restart and latched
shutdown. Thecurrentsourceisswitched
on and off with an effective duty cycle of
approximately 35%. This duty cycle is
determined by the ratio of CONTROL
pin charge (I ) and discharge currents
C
(I and I ). This current source is
CD1 CD2
turned off during normal operation when
the output MOSFET is switching.
5D
7/96


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for TOP202 electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ TOP202.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
TOP200The function is Three-terminal Off-line PWM Switch. Power IntegrationsPower Integrations
TOP200YAIThe function is Three-terminal Off-line PWM Switch. Power IntegrationsPower Integrations
TOP201The function is Three-terminal Off-line PWM Switch. Power Integrations Inc.Power Integrations  Inc.

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

TOP2     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search