DataSheet39.com

What is TQ2-12V?

This electronic component, produced by the manufacturer "ETC", performs the same function as "LOW PROFILE 2 FORM C RELAY".


TQ2-12V Datasheet PDF - ETC

Part Number TQ2-12V
Description LOW PROFILE 2 FORM C RELAY
Manufacturers ETC 
Logo ETC Logo 


There is a preview and TQ2-12V download ( pdf file ) link at the bottom of this page.





Total 7 Pages



Preview 1 page

No Preview Available ! TQ2-12V datasheet, circuit

LOW PROFILE
2 FORM C RELAY
TESTING
TQ-RELAYS
FEATURES
9
.354
• High sensitivity:
26.7
1.051
5+0.4
–0.2
.197+–..001068
14
.551
9
.354
2 Form C: 140 mW power consumption (single side stable type)
4 Form C: 280 mW power consumption (single side stable type)
5+0.4
–0.2
.197+–..001068
• Surge voltage withstand: 1500 V FCC Part 68
• Sealed construction allows automatic washing
• Self-clinching terminal also available
• M.B.B. contact types available
mm inch
SPECIFICATIONS
Contact
Standard
(B.B.M) type
M.B.B.type
Arrangement
2 Form C 4 Form C 2 Form D
Initial contact resistance, max.
(By voltage drop 6 V DC 1A)
50 m
Contact material
Gold-clad silver
Nominal switching capacity
(resistive load)
1 A 30 V DC
0.5 A 125 V AC
1 A 30 V
DC
Rating
Max. switching power
(resistive load)
Max. switching voltage
30 W, 62.5 V A
110 V DC, 125 V AC
30 W
110 V DC
Max. switching current
Min. switching capacity f1
1A
10 µA 10 mV DC
Single side stable
Nominal
operating
power 1 coil latching
140 mW
(3 to 12 V DC)
200 mW
(24 V DC)
300 mW
(48 V DC)
280 mW
(3 to 24 V DC)
400 mW
(48 V DC)
100 mW
(3 to 12 V DC)
150 mW
(24 V DC)
200 mW
200 mW
2 coil latching
200 mW
(3 to 12 V DC)
300 mW
(24 V DC)
400 mW
Expected
life (min.
opera-
tions)
Mechanical (at 180 cpm)
Electrical
(at 20 cpm)
(1 A 30 V DC
resistive)
1 A 30 V DC
resistive
0.5 A 125 V AC
resistive
108
2×105
105
107
105
Note:
f1This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the ac-
tual load.
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
*5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10 µs.
Characteristics
Standard
(B.B.M) type
M.B.B.type
Initial insulation resistance*1
Min. 1,000 M(at 500 V DC)
Initial
breakdown
voltage
Between open
contacts
Between contact
and coil
750 Vrms for 1 min. 300 Vrms for 1 min.
(Detection current: (Detection current:
10 mA)
10 mA)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
Between contact
sets
1,000 Vrms for 1 min.
(Detection current: 10 mA)
FCC surge voltage between open
contacts
1,500 V
Operate time [Set time]*3
(at 20°C)
Max. 3 ms (Approx. 2 ms)
[Max. 3 ms (Approx. 2 ms)]
Release time [Reset time]*4
(at 20°C)
M.B.B. time*8
Temperature rise*2 (at 20°C)
Max. 3 ms (Approx. 1 ms)
[Max. 3 ms (Approx. 2 ms)]
— Min. 10 µs.
Max. 50°C
Functional*5
Shock resistance
Destructive*6
Min. 490 m/s2 {50G}
Min. 980 m/s2 {100G}
Vibration
resistance
Functional*7
Destructive
176.4 m/s2 {18G}, 10 to 55 Hz
at double amplitude of 3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
Conditions for
operation, trans-
port and storage*9
(Not freezing and
condensing at low
temperature)
Ambient
temperature
Humidity
–40°C to +70°C
–40°F to +158°F
–40°C to +50°C
–40°F to +122°F
5 to 85% R.H.
Unit weight
2 Form C:
4 Form C:
Approx. 1.5 g .053 oz
Approx. 3 g .106 oz.
*8 M.B.B. time:
Measuring
condition
Min. 10 µs
500
5 V DC
*9 Refer to 4. Conditions for operation, transport and storage mentioned in Cautions
for use (Page 178).
133

line_dark_gray
TQ2-12V equivalent
4.-(1) Electrical life (DC load)
Tested sample: TQ2-12V, 6 pcs.
Condition: 1 A 30 V DC resistive load, 20 cpm
Change of pick-up and drop-out voltage
100
90
80 Pick-up voltage
70
60
Max.
Min.
50
40 Drop-out voltage
30 Max.
20 Min.
10
0 5 10 15 20
No. of operations, ×104
Change of contact resistance
100
90
80
70
60
50
40 Max.
30 Min.
20
10
0 5 10
No. of operations, ×104
6.-(1) Operate/release time characteristics
Tested sample: TQ2-12V, 10 pcs.
6
5
4
3
Operate time
2
1 Release time
Max.
Min.
Max.
Min.
0
80 90 100 110 120
Coil applied voltage, %V
Change of contact resistance
100
90
80
70
60
50 Max.
40
30 Min.
20
10
0 5 10 15 20
No. of operations, ×104
5.-(1) Coil temperature rise (2C)
Tested sample: TQ2-12V
Measured portion: Inside the coil
Ambient temperature: 30°C 86°F
70
Nominal coil voltage
60
3 to 12 V DC type
24 V DC type
50 1 A
40 1 A
0A
30
20
10
0
100 110 120 130 140 150
Coil applied voltage, %V
6.-(2) Operate/release time characteristics
Tested sample: TQ4-12V, 10 pcs.
6
5
4
3
Operate time
2
Max.
Min.
1 Max.
Min.
Release time
0
80 90 100 110 120
Coil applied voltage, %V
TQ
4.-(2) Electrical life (AC load)
Tested sample: TQ2-12V, 6 pcs.
Condition: 0.5 A 125 V AC resistive load, 20 cpm
Change of pick-up and drop-out voltage
100
90
80
Pick-up voltage
70
60
50
40 Drop-out voltage
30
20
10
Max.
Min.
Max.
Min.
0 5 10
No. of operations, ×104
5.-(2) Coil temperature rise (4C)
Tested sample: TQ4-12V
Measured portion: Inside the coil
Ambient temperature: 30°C 86°F
70
60
50
1A
40
0A
30
20
10
0
100 110 120 130 140 150
Coil applied voltage, %V
7. Distribution of pick-up and drop-out voltages
Tested sample: TQ2-12V, 50 pcs.
30
Pick-up voltage
Drop-out voltage
20
10
0 10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
8. Distribution of set and reset voltage
Tested sample: TQ2-L2-12V, 35 pcs.
30
Set voltage
Reset voltage
20
10
0 10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
9. Ambient temperature characteristics
Tested sample: TQ2-12V, 5 pcs.
10. Distribution of contact resistance
Tested sample: TQ2-12V, 30 pcs. (30×4 contacts)
–40 –20
40 Drop-out
voltage x
20 x
0 Pick-up voltage
20 40 60 80
Ambient temperature,°C
–20
–40
40
30
20
10
0 30 40 50
Contact resistance, m
137


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for TQ2-12V electronic component.


Information Total 7 Pages
Link URL [ Copy URL to Clipboard ]
Download [ TQ2-12V.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
TQ2-12VThe function is LOW PROFILE 2 FORM C RELAY. ETCETC
TQ2-12VThe function is 2-pole 5 mm Surface Mount Relay. PanasonicPanasonic

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

TQ2-     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search