DataSheet39.com

What is USB6B1?

This electronic component, produced by the manufacturer "Microsemi Corporation", performs the same function as "TVSarray Series".


USB6B1 Datasheet PDF - Microsemi Corporation

Part Number USB6B1
Description TVSarray Series
Manufacturers Microsemi Corporation 
Logo Microsemi Corporation Logo 


There is a preview and USB6B1 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! USB6B1 datasheet, circuit

8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
USB6B1
DESCRIPTION (500 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged
in a SO-8 configuration giving protection to one pair of Bidirectional
data lines and the Vbus. It is designed for use in applications where
protection is required at the board level from voltage transients caused
by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
TVSarraySeries
These TVS arrays have a peak power rating of 500 watts for an
8/20µsec pulse. This array is designed for protection of sensitive
circuitry consisting of UNIVERSAL SERIAL BUS (USB) I/O transceivers.
The capacitance between the I/O data lines are minimal too ensure no significant signal distortion or loss at
the 12 Megabit or greater data rate. This feature allows full compatibility with USB port standards.
FEATURES
500 watt Peak Pulse Power protection at 8/20 µsec
threat.
Protects each data line and between Vbus supply and
ground
Complies with MIL STD 883C Method 3015.7 class 3
Protection Per IEC 1000-4-2, IEC 1000-4-4
Provides electrically isolated protection
ULTRA LOW CAPACITANCE 5 pF line to ground
ULTRA LOW CAPACITANCE 3.5 pF line to line
ULTRA LOW STANDBY CURRENT
MAXIMUM RATINGS
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 500 Watts (8/20 µsec, Figure 1
and 2)
Pulse Repetition Rate: <.01%
MECHANICAL
Molded SO-8 Packaging
Lead solder temperature (10 sec duration) 260ºC
Weight: 0.066 grams (approximate)
Marked with logo and marking code
Pin 1 indicated by dot on top of package
Encapsulation meets UL 94V-0
PACKAGING
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500, pieces (OPTIONAL)
Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND
OFF
VOLTAG
E
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
STANDBY
CURRENT
ID
@ VWM
µA
CAPACITANCE
(f=1 MHz)
@0V
C
Data + To Data -
pF
MAX
MIN
MAX
MAX
MAX
TYP
USB6B1
USB6
5.0
6.0
9.8
18 5
15
TEMPERATURE
COEFFICIENT
of VBR
áV(BR)
mV/°C
MAX
3
MSC1068.PDF
ISO 9001 CERTIFIED
REV E 7/07/2000


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for USB6B1 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ USB6B1.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
USB6BThe function is TVSarray Series. Microsemi CorporationMicrosemi Corporation
USB6B1The function is TVSarray Series. Microsemi CorporationMicrosemi Corporation
USB6B1The function is DATA LINES PROTECTION. STMicroelectronicsSTMicroelectronics

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

USB6     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search