DataSheet39.com

What is USB0403?

This electronic component, produced by the manufacturer "Microsemi Corporation", performs the same function as "TVSarray Series".


USB0403 Datasheet PDF - Microsemi Corporation

Part Number USB0403
Description TVSarray Series
Manufacturers Microsemi Corporation 
Logo Microsemi Corporation Logo 


There is a preview and USB0403 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! USB0403 datasheet, circuit

8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
USB0403
thru
USB0424
TVSarray ™ Series
DESCRIPTION (300 watt)
This 4 pin 1 line unidirectional ULTRA LOW CAPACITANCE array is
designed for use in applications requiring board level protection from
voltage transients caused by electrostatic discharge (ESD) as defined
by IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and
effects of secondary lightning.
These arrays are used to protect 1 discrete line utilizing pins (1,4 signal
and 2,3 ground). The S0T-143 product provides board level protection
from static electricity and other induced voltage surges that can
damage sensitive circuitry.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.3 Volt components such as
DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24Volts.
FEATURES
Protects 3.3 up through 24V Components
Protects 1 line unidirectional
Provides electrically isolated protection
SOT-143 Packaging
ULTRA LOW CAPACITANCE 5 pF
MECHANICAL
Molded SOT-143 Surface Mount
Weight: .035 grams (approximate)
Body Marked with device marking
code
Pin #1 defined by DOT on top of
package
MAXIMUM RATINGS
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1)
Pulse Repetition Rate: <.01%
PACKAGING
Tape & Reel EIA Standard 481-1-A
7 inch reel 5,000 pieces
13 inch reel 10,000 pieces
ELECTRICAL CHARACTERISTICS @ 250C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND
OFF
VOLTAG
E
VWM
VOLTS
MAX
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
MIN
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
MAX
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
STAND OFF
CURRENT
ID
@ VWM
µA
MAX
USB0403 BA 3.3
4
8 11 200
USB0405 BB 5.0
6.0
10.8
13 100
USB0412
BC 12.0
13.3
19
26 1
USB0415
BD 15.0
16.7
25
32 1
USB0424
BE 24.0
26.7
44
57 1
CAPACITANCE
(f=1 MHz)
@0V
C
pF
MAX
5
5
5
5
5
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
-5
3
10
13
30
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage
VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of
the circuit to be protected.
MSC1374.PDF
ISO 9001 CERTIFIED
REV B 1/14/2000


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for USB0403 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ USB0403.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
USB0403The function is TVSarray Series. Microsemi CorporationMicrosemi Corporation
USB0403The function is (USB0403 - USB0424C) LOW CAPACITANCE TVS ARRAY. Protek DevicesProtek Devices
USB0403CThe function is TVSarray Series. Microsemi CorporationMicrosemi Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

USB0     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search