DataSheet39.com

What is DI-35?

This electronic component, produced by the manufacturer "ETC", performs the same function as "16 W Audio Amplifier Power Supply".


DI-35 Datasheet PDF - ETC

Part Number DI-35
Description 16 W Audio Amplifier Power Supply
Manufacturers ETC 
Logo ETC Logo 


There is a preview and DI-35 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! DI-35 datasheet, circuit

Design Idea DI-35
TOPSwitch-®GX
16 W Audio Amplifier Power Supply
Application
Audio Amplifier
Device
TOP245P
Power Output Input Voltage
16 W (35 W Peak) 85-265 VAC
Output Voltage
16 V
Topology
Flyback
Design Highlights
• No heatsinks required!
• 77% efficiency (min), @ 85 VAC input/35 W output
• Low no-load input power: < 0.7 W @ 230 VAC input
• Low component count: 37, excluding I/O connectors
• Stable operation with or without 10,000 µF output buffer
capacitor
• Robust transformer design enables 35 W peak power
• Meets CISPR22B EMI with > 10 dB of margin
• Ideal for both class AB and class D audio amplifiers
Operation
Many of the built-in TOPSwitch-GX features have been used to
reduce the component count, transformer size, and overall cost
of this universal input flyback power supply. Designed around
a TOP245P (DIP-8 package), the device uses PCB copper for
its heatsink, eliminating the costs of both a heatsink and the
installation labor. Output diode D7 is also cooled the same way.
Resistors R1 and R2 set the nominal Under-Voltage (UV)
lockout and Overvoltage (OV) shutdown limits to 84 V and
378 V, respectively. UV lockout protects the supply from
overheating at low line and eliminates power-up and power-
down glitches. OV shutdown protects the power supply from
line surges.
The EMI filter has been significantly simplified to three
components (L1, CX1 and CY1), thanks to the built-in
frequency jitter function of the TOPSwitch-GX family.
The RCD network of C4, R3, R4, and D5 limits (clamps) the
peak voltage that the U1-DRAIN sees. A glass-passivated
normal recovery diode (D5) recycles stored leakage energy,
increasing overall efficiency. DRAIN ringing is dampened
by R4 (which is necessary when a normal recovery diode is
used).
The bias winding provides operating power and feedback
current to the CONTROL pin of U1. The U2-LED, R8 and
VR1 comprise the feedback circuit that senses the output
voltage. The current through the U2-LED regulates the
output voltage, by modulating the feedback current that
flows into the CONTROL pin of U1.
Key Design Points
• Ensure that the control loop has enough phase margin
at the extremes of the rated input voltage and output
load, both with and without the output buffer capacitor.
• A 5% VR1 should be acceptable for an audio amplifier.
Greater accuracy will require a 2% VR1.
• OV and UV thresholds are determined by: VOV =
225
µA
x
(R1+R2)
and
V
UV
=
50
µA
x
(R1+R2).
D1 & D2
1N4007
D3 & D4
1N4007
L1
6.8 mH
0.8 A
CX1
220 nF
250 VAC
F1
3.15 A
250 V
85-265
VAC
R3 C4
200 k 1 nF
1/2 W 1 KV
CY1
2.2 nF
(Safety)
1 9, 10
R6 C6
33 470 pF
1/4 W 100 V
L2
3.3 uH
C1
100 µF
400 V
R1
1M
R2
1M
3
R4
33
1/4 W
D5
IN4007G
TOPSwitch-GX
DM
U1
TOP245P
CONTROL
C
D7
SB5100
6, 7
R7
4 10
5
T1
D6
BAV20
C7 C8
470 µF 470 µF
25 V
C5
1 µF
25 V R8
150
50 V
U2
PC817A
U2 U2
R10
1k
R5
S C2 3.3
100 nF
50 V
C3
100 µF
16 V
VR1
IN5244B
5%
LN
Figure 1. Audio Amplifier Power Supply.
C9
100 µF
25 V 16 V, 1 A / 2.2 A
RTN
C10
47 µF
25 V
PI-3731-012604
DI-35
www.powerint.com
March 2004


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for DI-35 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ DI-35.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
DI-35The function is 16 W Audio Amplifier Power Supply. ETCETC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

DI-3     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search