P4KE33 Datasheet PDF - Shanghai Sunrise Electronics
Part Number | P4KE33 | |
Description | TVS Diode (Transient Voltage Suppressor) | |
Manufacturers | Shanghai Sunrise Electronics | |
Logo | ||
There is a preview and P4KE33 download ( pdf file ) link at the bottom of this page. Total 3 Pages |
Preview 1 page No Preview Available ! SHANGHAI SUNRISE ELECTRONICS CO., LTD.
P4KE6.8 THRU P4KE440CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:6.8-440V
PEAK PULSE POWER: 400W
TECHNICAL
SPECIFICATION
FEATURES
• 400W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to VBR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
265oC/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
• Mounting position: Any
DO - 41
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25oC ambient temperature unless otherwise specified)
RATINGS
SYMBOL
VALUE
UNITS
Peak power dissipation
(Note 1)
Pppm
Minimum 400
W
Peak pulse reverse current
(Note 1)
Ippm
See Table
A
Steady state power dissipation
(Note 2) Pm(av)
1.0
W
Peak forward surge current
(Note 3)
IFSM
40 A
Maximum instantaneous forward voltage at 50A
for unidirectional only
(Note 4)
VF
3.5/6.5
V
Operating junction and storage temperature range
TSTG,TJ
-55 to + 175
oC
Notes:
1. 10/1000µS waveform non-repetitive current pulse, and derated above Ta=25oC
2. Tl=75oC, lead length 9.5mm, Mounted on copper pad area of (40×40mm)
3. Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
4. VF=3.5V max. for devices of V(BR) 200V, and VF=5.0V max. for devices of V(BR) >200V
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types P4KE7.5 thru types P4KE440A
(e.g. P4KE7.5C,P4KE440CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having VWM of 10 volts and less, the ID limit is doubled.
4. Electrical characteristics apply in both directions.
http://www.sse-diode.com
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for P4KE33 electronic component. |
Information | Total 3 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Product Image and Detail view | 1. 26.8V, 400W, Transient voltage suppressor [ Learn More ] | |
Download | [ P4KE33.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
P4KE30 | The function is TRANSIENT VOLTAGE SUPPRESSORS DIODE. Jinan Gude Electronic Device | |
P4KE30 | The function is Zener Diode ( Rectifier ). Microsemi Corporation | |
P4KE30 | The function is TVS Diode (Transient Voltage Suppressor). Diodes Incorporated | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
P4KE
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |