|
|
PDF SMBG5.0 Data sheet ( Hoja de datos )
| Número de pieza | SMBG5.0 | |
| Descripción | SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR | |
| Fabricantes | General Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMBG5.0 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
SMBG AND SMBJ5.0 THRU 170CA
SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to170 Volts Peak Pulse Power - 600 Watts
0.086 (2.20)
0.077 (1.95)
DO-214AA
MODIFIED J-BEND
0.155 (3.94)
0.130 (3.30)
0.096 (2.44)
0.084 (2.13)
0.180 (4.57)
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
MAX.
0.220 (5.59)
0.205 (5.21)
DO-215AA
GULL WING
0.125 (3.17)
0.115 (2.92)
0.280 (7.11)
0.260 (6.60)
0.245 (6.22)
0.130 (5.72)
0.016 (0.41)
0.006 (0.15)
0.095 (2.41)
0.075 (1.90)
0.020
(0.51)
MAX.
0.058 (1.47)
0.038 (0.97)
0.400 (10.16)
0.380 (9.64)
0.032 (8.10)
0.024 (6.10)
Dimensions in inches and (millimeters)
0.008 (0.20)
0.004 (0.10)
SEATING
PLANE
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ For surface mounted applications in order to optimize
board space
♦ Low profile package
♦ Built-in strain relief
♦ Glass passivated junction
♦ Low incremental surge resistance
♦ 600W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
♦ Excellent clamping capability
♦ Fast response time: typically less than 1.0ps from 0 volts
to V(BR) for unidirectional and 5.0ns for bidirectional types
♦ For devices with V(BR)≥10V, ID are typically less
than 1.0µA
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO214AA / DO215AA molded plastic body
over passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: For unidirectional types the color band denotes the
cathode, which is postitive with respect to the anode under
normal TVS operation
Mounting Position: Any
Weight: 0.003 ounces, 0.093 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bidirectional use suffix C or CA for types SMB-5.0 thru SMB-170 (eg. SMBG5.0C, SMBJ170CA).
Electrical characteristics apply in both directions
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs waveform (NOTES 1, 2, FIG. 1)
Peak pulse current with a 10/1000µs waveform (NOTE 1)
Peak forward surge current 8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) (NOTES 2, 3) - unidirectional only
Maximum instantaneous forward voltage at 50A (NOTE 3) unidirectional only
Operating junction and storage temperature range
SYMBOLS
PPPM
IPPM
IFSM
VF
TJ, TSTG
VALUE
Minimum 600
SEE TABLE 1
100.0
3.5
-55 to +150
NOTES:
(1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2
(2) Mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pads to each terminal
(3) Measured on 8.3ms single half sine-wave. For uni-directional devices only.
UNITS
Watts
Amps
Amps
Volts
°C
2/1/99
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet SMBG5.0.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMBG5.0 | SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR | General Semiconductor |
| SMBG5.0 | (SMBG5.0 - SMBG170CA) SURFACE MOUNT 600 Watt Transient Voltage Suppressor |  Microsemi |
| SMBG5.0 | TVS Diode ( Rectifier ) |  Vishay |
| SMBG5.0A | SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR | General Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |