03-Jan Datasheet PDF - Vishay Siliconix
There is a preview and 03-Jan download ( pdf file ) link at the bottom of this page.
Total ( 5 pages )
Preview 1 page
No Preview Available !
Basic Sinterglass Diode Parameters
The major parameters for the selection of the appro-
priate sinterglass diodes are the maximum reverse
voltage (VRRM), the average forward current (IFAV)
and for switching application the reverse recovery
characteristic (trr), too. Additional parameters may be
for example the reverse avalanche energy capability
(ER) and forward surge capability (IFSM) etc.
Repetitive peak reverse voltage, including all repeated reverse transient voltages
Reverse breakdown voltage
Reverse (leakage) current, at a specified reverse voltage VR and temperature TJ
Forward voltage drop, at a specified forward current IF and temperature TJ
Average forward output current, at a specified current waveform (normally 10ms/50Hz half-sine-
wave, sometimes 8.3ms/60Hz half-sine-wave), a specified reverse voltage and a specified mounting
condition (e.g. lead-length = 10mm or PCB mounted with certain pads and distance)
Peak forward surge current, with a specified current waveform (normally 10ms/50Hz half-sine-wave,
sometimes 8.3ms/60Hz half-sine-wave),
trr Reverse recovery time, at a specified forward current (normally 0.5A), a specified reverse current
(normally 1.0A) and specified measurement conditions (normally from 0 to 0.25A)
ER Reverse avalanche energy, non-repetitive
The voltage direction is given
• by an arrow which points from the measuring point
to the reference point
• by a two letter subscript, where the first letter is the
measuring point and the second letter is the refer-
In the case of alternating voltages, once the voltage
direction is selected it is maintained throughout. The
alternating character of the quantity is given with the
time dependent change in sign of its numerical values
A I1 B
A I2 = –I1
B B B 94 9315
The numerical value of the voltage is positive if the
potential at the arrow tail is higher than at the arrow
head; i.e., the potential difference from the measuring
point (A) to the reference point (B) is positive.
The numerical value of the voltage is negative if the
potential at the arrow head is higher than the tail; i.e.,
the potential difference from the measuring point to
the reference point is negative.
The numerical value of the current is positive if the
charge of the carriers moving in the direction of the
arrow is positive (conventional current direction), or if
the charge of the carriers moving against this direc-
tion is negative. The numerical value of the current is
negative if the charge of the carriers moving in the
direction of the arrow is negative, or if the charge of
the carriers moving against this direction is positive.
The general rules stated above are also valid for alter-
nating quantities. Once the direction is selected, it is
maintained throughout. The alternating character of
the quantity is given with the time-dependent change
in sign of its numerical values.
Document Number 84067
Rev. 7, 07-Jan-03
Not for new developments: This heading indicates
that the device concerned should not be used in
equipment under development. It is, however, avail-
able for devices presently in production.
Document Number 84067
Rev. 7, 07-Jan-03
Preview 5 Page
On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 03-Jan electronic component.
|Information||Total 5 Pages|
|Link URL||[ Copy URL to Clipboard ]|
|Download||[ 03-Jan.PDF Datasheet ]|
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. They offer a wide range of electronic components, including semiconductors, resistors, capacitors, connectors, and many others. Electronic components distributors play a crucial role in the electronics industry by providing easy access to the components. They help customers to save time and money by providing a one-stop-shop for all their component needs.
|SparkFun Electronics||Allied Electronics||DigiKey Electronics||Arrow Electronics|
|Mouser Electronics||Adafruit||Element14||Chip One Stop|
|03-Jan||The function is Basic Definitions.|
Semiconductors commonly used in industry:
1N4148 | BAW56 | 1N5400 | NE555 | LM324 | BC327 | IRF840 | 2N3904 |
Quick jump to:
03-J 1N4 2N2 2SA 2SC 74H BC HCF IRF KA LA LM MC NE ST STK TDA TL UA