DataSheet39.com

What is 5KP110?

This electronic component, produced by the manufacturer "General Semiconductor", performs the same function as "TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR".


5KP110 Datasheet PDF - General Semiconductor

Part Number 5KP110
Description TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Manufacturers General Semiconductor 
Logo General Semiconductor Logo 


There is a preview and 5KP110 download ( pdf file ) link at the bottom of this page.





Total 4 Pages



Preview 1 page

No Preview Available ! 5KP110 datasheet, circuit

5KP5.0 THRU 5KP110A
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to 110 Volts Peak Pulse Power - 5000 Watts
Case Style P600
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
Available in uni-directional only
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
5000W peak pulse power
capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.05%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less
than 1.0ps from 0 Volts to V(BR)
Devices with V(BR)>10V ID are typically ID less
than 1.0µA
High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: Molded plastic body over glass passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: The color band denotes the cathode, which is
postitive with respect to the anode under normal TVS oper-
ation
Mounting Position: Any
Weight: 0.07 ounce, 2.1 grams
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs
waveform (NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths 0.375” (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) (NOTE 3)
Instantaneous forward voltage at 100A, (NOTE 3)
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 0.8 x 0.8” (20 x 20mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
VALUE
Minimum 5000
SEE TABLE 1
8.0
400
3.5
-55 to +175
UNITS
Watts
Amps
Watts
Amps
Volts
°C
1/21/99


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 5KP110 electronic component.


Information Total 4 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 5KP110.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
5KP11The function is Zener Diode ( Rectifier ). Microsemi CorporationMicrosemi Corporation
5KP11The function is TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR. General SemiconductorGeneral Semiconductor
5KP11The function is 5000 Watt Transient Voltage Suppressors 5.0 to 110 Volts. Micro Commercial ComponentsMicro Commercial Components

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

5KP1     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search