DataSheet39.com

What is 5KP10?

This electronic component, produced by the manufacturer "Shanghai Sunrise Electronics", performs the same function as "TVS Diode (Transient Voltage Suppressor)".


5KP10 Datasheet PDF - Shanghai Sunrise Electronics

Part Number 5KP10
Description TVS Diode (Transient Voltage Suppressor)
Manufacturers Shanghai Sunrise Electronics 
Logo Shanghai Sunrise Electronics Logo 


There is a preview and 5KP10 download ( pdf file ) link at the bottom of this page.





Total 3 Pages



Preview 1 page

No Preview Available ! 5KP10 datasheet, circuit

SHANGHAI SUNRISE ELECTRONICS CO., LTD.
5KP5.0 THRU 5KP110CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:50-110V
PEAK PULSE POWER: 5000W
TECHNICAL
SPECIFICATION
FEATURES
• 5000W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to VBR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
265oC/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
• Mounting position: Any
R-6
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25oC ambient temperature unless otherwise specified)
RATINGS
SYMBOL
VALUE
UNITS
Peak power dissipation
(Note 1)
Pppm
Minimum 5000
W
Peak pulse reverse current
(Note 1)
Ippm
See Table
A
Steady state power dissipation
(Note 2) Pm(av)
8.0
W
Peak forward surge current
(Note 3)
IFSM
400 A
Maximum instantaneous forward voltage at 100A
VF
3.5 V
Operating junction and storage temperature range
TSTG,TJ
-55 to + 175
oC
Notes:
1. 10/1000µS waveform non-repetitive current pulse, and derated above Ta=25oC
2. Tl=75oC, lead length 9.5mm, Mounted on copper pad area of (20×20mm)
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types 5KP5.0 thru types 5KP110A
(e.g. 5KP7.5C,5KP110CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having VWM of 10 volts and less, the ID limit is doubled.
4. Electrical characteristics apply in both directions.
http://www.sse-diode.com


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 5KP10 electronic component.


Information Total 3 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 5KP10.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
5KP10The function is Zener Diode ( Rectifier ). Microsemi CorporationMicrosemi Corporation
5KP10The function is TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR. General SemiconductorGeneral Semiconductor
5KP10The function is 5000 Watt Transient Voltage Suppressors 5.0 to 110 Volts. Micro Commercial ComponentsMicro Commercial Components

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

5KP1     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search