DataSheet39.com

What is AZ2280-1A-120A?

This electronic component, produced by the manufacturer "ETC", performs the same function as "30 AMP MINIATURE POWER RELAY".


AZ2280-1A-120A Datasheet PDF - ETC

Part Number AZ2280-1A-120A
Description 30 AMP MINIATURE POWER RELAY
Manufacturers ETC 
Logo ETC Logo 


There is a preview and AZ2280-1A-120A download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! AZ2280-1A-120A datasheet, circuit

AZ2280
30 AMP MINIATURE
POWER RELAY
FEATURES
Quick-connect leads for contacts and coil
1 Form A, B and C contacts available
AC and DC coils available
Available with epoxy seal
UL and Canadian file E44211
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at rated load
Arrangement SPST (1 Form A, or B)
SPDT (1 Form C)
Ratings
UL, CUR
Minimum
Load
Material
Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current:30 A (Form A N.O.)
15 A (Form B N.O.)
20 A (Form C N.O.)
15 A (Form C N.O.
Max. switched voltage: 277 VAC, 30 VDC
30/15 A @ 240 VAC, gen use (NO/NC, Form A or B)
20/10 A @ 240 VAC, gen use (NO/NC, Form C)
20/10 A @ 28 VDC, res (NO/NC, Form A or B)
1.0/.25 Hp @ 120 VAC, (NO/NC, Form A or B)
2.0/.50 Hp @ 240 VAC, (NO/NC, Form A, B or C)
5/3 A @ 240 VAC, tungsten (NO/NC, Form A, B or C)
6/3 A @ 277 VAC, gen use (NO/NC, Form A, B or C)
6/3 A @ 277 VAC, ballast (NO/NC, Form A, B or C)
5 VDC, 0.1 A
Silver alloy
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
Operate Time
15 ms at nominal coil voltage
Release Time
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
DC: Greater than 10% of nominal coil voltage
AC: Greater than 20% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-55°C (-67°F) to 85°C (185°F)
Storage
-55°C (-67°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, Quick Connects
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
DC: 500 mW
AC: 1.4 VA
DC: 1.7 W at 20°C (68°F)
AC: 2.7 VA at 20°C (68°F)
38°C (68°F)
Max. 105°C (221°F)
Max. Immersion Time 30 seconds
Weight
36 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected]
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
1999-03-11


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AZ2280-1A-120A electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AZ2280-1A-120A.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AZ2280-1A-120AThe function is 30 AMP MINIATURE POWER RELAY. ETCETC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AZ22     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search