DataSheet39.com

What is FODM3011?

This electronic component, produced by the manufacturer "Fairchild Semiconductor", performs the same function as "4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM-PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS".


FODM3011 Datasheet PDF - Fairchild Semiconductor

Part Number FODM3011
Description 4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM-PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS
Manufacturers Fairchild Semiconductor 
Logo Fairchild Semiconductor Logo 


There is a preview and FODM3011 download ( pdf file ) link at the bottom of this page.





Total 10 Pages



Preview 1 page

No Preview Available ! FODM3011 datasheet, circuit

4-PIN FULL PITCH MINI-FLAT PACKAGE
RANDOM-PHASE TRIAC DRIVER
OUTPUT OPTOCOUPLERS
FODM3010 FODM3011 FODM3012 FODM3021
FODM3022
FODM3023
DESCRIPTION
The FODM301X and FODM302X series consists of a GaAs infrared emitting diode driving a silicon bilateral switch housed in a
compact 4-pin mini-flat package. The lead pitch is 2.54 mm. They are designed for interfacing between electronic controls and
power triacs to control resistive and inductive loads for 115V/240V operations.
FEATURES
• Compact 4-pin surface mount package
(2.4 mm maximum standoff height)
• Peak blocking voltage
250V (FODM301X)
400V (FODM302X)
• Available in tape and reel quantities of
500 and 2500.
• Applicable to Infrared Ray reflow
(230°C max, 30 seconds.)
• BSI, CSA and VDE certifications
pending
• UL (File# E90700) certified
ANODE 1
CATHODE 2
MAIN
4 TERMINAL
MAIN
3 TERMINAL
APPLICATIONS
• Industrial controls
• Traffic lights
• Vending machines
• Solid state relay
• Lamp ballasts
• Solenoid/valve controls
• Static AC power switch
• Incandescent lamp dimmers
• Motor control
PACKAGE DIMENSIONS
PIN 1
0.026 (0.66)
0.100 (2.54) TYP
0.020 (0.51)
0.012 (0.30)
0.287 (7.29)
0.248 (6.30)
0.173 (4.40)
TYP
0.035 (0.89)
0.012 (0.30)
0.169 (4.29)
0.154 (3.91)
0.094 (2.39)
0.079 (2.01)
0.008 (0.20)
0.000 (0.0)
0.033 (0.85)
0.026 (0.65)
NOTE
All dimensions are in inches (millimeters)
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified)
Parameter
Symbol
TOTAL PACKAGE
Storage Temperature
TSTG
Junction Temperature
TJ
Operating Temperature
TOPR
EMITTER
Continuous Forward Current
IF (avg)
Peak Forward Current (1 µs pulse, 300 pps.)
IF (pk)
Reverse Input Voltage
VR
Power Dissipation (No derating required over operating temp. range)
PD
DETECTOR
On-State RMS Current
IT(RMS)
Off-State Output Terminal Voltage
FODM3010/1/2
FODM3021/2/3
VDRM
Power Dissipation (No derating required over operating temp. range)
PD
© 2003 Fairchild Semiconductor Corporation
Page 1 of 10
Value
-40 to +125
125
-40 to +85
60
1
3
100
70
250
400
300
Units
°C
°C
°C
mA
A
V
mW
mA (RMS)
V
mW
11/10/03

line_dark_gray
FODM3011 equivalent
4-PIN FULL PITCH MINI-FLAT PACKAGE
RANDOM-PHASE TRIAC DRIVER
OUTPUT OPTOCOUPLERS
FODM3010 FODM3011 FODM3012 FODM3021
FODM3022
FODM3023
TYPICAL PERFORMANCE CURVES
400V (FODM302X)
250V (FODM301X)
Vdc
PULSE
INPUT
RTEST
MERCURY
WETTED
RELAY
CTEST
R = 10 k
D.U.T.
X100
SCOPE
PROBE
1. The mercury wetted relay provides a high speed repeated
pulse to the D.U.T.
2. 100x scope probes are used, to allow high speeds and
voltages.
3. The worst-case condition for static dv/dt is established by
triggering the D.U.T. with a normal LED input current, then
removing the current. The variable RTEST allows the dv/dt to
be gradually increased until the D.U.T. continues to trigger in
response to the applied voltage pulse, even after the LED
current has been removed. The dv/dt is then decreased until
the D.U.T. stops triggering. τRC is measured at this point and
recorded.
APPLIED VOLTAGE
WAVEFORM
252 V (FODM302X)
158 V (FODM301X)
0 VOLTS
τRC
Vmax = 400 V (FODM302X)
= 250 V (FODM301X)
dv/dt =
0.63 Vmax
τRC
=
252
τRC (FODM302X)
=
158
τRC (FODM301X)
Figure 8. Static dv/dt Test Circuit
NOTE: This optoisolator should not be used to drive a load directly. It is
intended to be a trigger device only.
RL
VCC
Rin 1
4 180
FODM3010
FODM3011
FODM3012
23
Figure 9. Resistive Load
120 V
60 Hz
ZL
VCC
Rin 1
4 180
2.4k
MOC3010
MOC3011
MOC3012
2
3
0.1 µF C1
120 V
60 Hz
Figure 10. Inductive Load with Sensitive Gate Triac (IGT 15 mA)
© 2003 Fairchild Semiconductor Corporation
Page 5 of 10
11/10/03


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for FODM3011 electronic component.


Information Total 10 Pages
Link URL [ Copy URL to Clipboard ]
Download [ FODM3011.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
FODM3010The function is 4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM-PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS. Fairchild SemiconductorFairchild Semiconductor
FODM3011The function is 4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM-PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS. Fairchild SemiconductorFairchild Semiconductor
FODM3012The function is 4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM-PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS. Fairchild SemiconductorFairchild Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

FODM     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search