|
|
PDF HS-1410RH Data sheet ( Hoja de datos )
| Número de pieza | HS-1410RH | |
| Descripción | Radiation Hardened/ High Speed/ Low Power/ Current Feedback Op Amp with Output Disable | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HS-1410RH (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Data Sheet
HS-1410RH
August 1999 File Number 4470.1
Radiation Hardened, High Speed, Low
Power, Current Feedback Op Amp with
Output Disable
The Radiation Hardened HS-1410RH is a high speed, low
power current feedback amplifier built with Intersil’s
proprietary complementary bipolar UHF-1 (DI, bonded
wafer) process. This technology provides an immunity to
Single Event Latch-up and the capability of highly reliable
performance in any radiation environment. These devices
are QML approved and are manufactured and screened in
full compliance with MIL-PRF-38535.
This amplifier features a TTL/CMOS compatible DISABLE
control, pin 10, which when pulled low, reduces the supply
current and forces the output into a high impedance state.
This allows easy implementation of simple, low power
multiplexing circuits in redundant spacecraft designs. The
wide bandwidth and fast slew rate make these devices
ideal for pulse and video amplifier and routing applications.
The high output current and disable feature provide the
perfect combination needed for A/D driver/multiplexer
circuits.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-98518. A “hot-link” is provided
on our homepage for downloading.
http://www.intersil.com/spacedefense/space.htm
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
5962F9851801VXC
HS9-1410RH-Q
TEMP. RANGE
(oC)
-55 to 125
Features
• Electrically Screened to SMD # 5962-98518
• QML Qualified per MIL-PRF-38535 Requirements
• Radiation Environment
- Total Dose. . . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si)
- SEL . . . . . . . . . . . . . . None (Bonded Wafer DI Process)
• Wide 3dB Bandwidth (Typ) . . . . . . . . . . . . . . . . . . 360MHz
• High Slew Rate (Typ) . . . . . . . . . . . . . . . . . . . . 1000V/µS
• High Output Current (Typ) . . . . . . . . . . . . . . . . . . . . 60mA
• Low Supply Current (Typ) . . . . . . . . . . . . . . . . . . . . 5.9mA
• Output Enable/Disable Time (Typ) . . . . . . . . . 180ns/35ns
• Upgrade for CLC410/411
Applications
• Multiplexing Flash A/D Drivers
• High Speed Signal Switching and Routing
• Pulse and Video Amplifiers
• Wideband Amplifiers
• Imaging Systems
Pinout
HS9-1410RH (FLATPACK) CDFP3-F10
TOP VIEW
NC
1 10
DISABLE
-IN
29
V+
+IN
38
OUT
V-
47
NC
NC
56
NC
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet HS-1410RH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HS-1410RH | Radiation Hardened/ High Speed/ Low Power/ Current Feedback Op Amp with Output Disable | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |