HT-50-1 Datasheet PDF - Hirose Electric
Part Number | HT-50-1 | |
Description | Stripline Mounting Non-reflective Terminations | |
Manufacturers | Hirose Electric | |
Logo | ||
There is a preview and HT-50-1 download ( pdf file ) link at the bottom of this page. Total 5 Pages |
Preview 1 page No Preview Available ! Stripline Mounting Non-reflective Terminations
HT Series
HT-30-1
HT-50-1
HT-10-2
HT-20-3
HT-1-3
HT-1-2
HT-1-1 HT-025-1 HT-05-2 HT-025-2
sFeatures
1.High Performance
These super wide bandwidth/ultra high matching
non-reflective termination use Hirose Electric
original high frequency matching technology.
2.Equipped with Tabs
Termination are equipped with tabs to permit direct
mounting to flat circuits.
3.Housing functions as a radiator to
permit small size and high-density
mounting.
sProduct Specifications
Ratings
Rated frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
DC to 15.0 GHz
50 ohms
0.25 to 50 W
Operating temperature range
Operating relative humidity
NOTE: The frequency range and the maximum input power will differ depending on the products.
-10ç to +60ç
95% Max.
HT-025-1, HT-025-2, HT-05-2, HT-1-1, HT-1-2, HT-1-3, HT-10-2, HT-20-3, and HT-50-1
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡15 max. (Minutes)
200 cycles
HT-30-1
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 294 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +120ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡15 max. (Minutes)
200 cycles
sMaterials
HT-025-1, HT-025-2, and HT-05-2
HT-1-1, HT-1-2, and HT-1-3
Part
Tabs
Resistor
HT-30-1
Part
Plate
Retaining plate
Tabs
Resistor
Material
Copper
Metal film
Finish
Solder plating
----------
Material
Aluminum
Phosphor bronze
Copper
Metal film
Finish
Conductive alumite
Nickel plating
Tin plating
----------
Part
Plate
Tabs
Resistor
Material
Aluminum
Copper
Metal film
Finish
Nickel plating
Solder plating
----------
HT-10-2, HT-20-3, and HT-50-1
Part Material
Plate
Copper
Tabs
Copper
Resistor
Metal film
Finish
Nickel plating
Silver plating
----------
72
|
|
Terminations for the Division Part of a Wilkinson Divider (100 ohms Type)
HT Series
HT-20-3(100)
sFeatures
1.High Performance
These wide bandwidth/ultra high matching non-
reflective termination use Hirose Electric original
high frequency matching technology.
2.Equipped with Tabs
Termination are equipped with tabs to permit direct
mounting to Wilkinson type flat circuits.
3.High Power and Small Size
Beryllia is used for the material of the resistance
element to enable the termination to be of small
size and used with high power.
sProduct Specifications
Ratings
Rated frequency range
Characteristic impedance
Maximum Input Power
Resistance value
DC to 8.0 GHz
100 ohms
20W
100±2 ohms
Item
1.Vibration
2.Shock
Standard
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
Heat sink temperature
at maximum output
Operating temperature range
Operating relative humidity Weight
+65çMax.
10çto +65ç
95% Max.
0.4 g
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +120ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡15 max. (Minutes)
200 cycles
sMaterial
Part
Plate
Tabs
Resistor
Material
Copper
Copper
Metal film
Finish
Nickel plating
Silver plating
----------
sExternal Dimensions
∆! CAUTION: Beryllia is used in this product. Please follow associated laws when disposing.
76
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HT-50-1 electronic component. |
Information | Total 5 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ HT-50-1.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
HT-50-1 | The function is Stripline Mounting Non-reflective Terminations. Hirose Electric | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HT-5
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |