DataSheet39.com

What is AT-259PIN?

This electronic component, produced by the manufacturer "Tyco Electronics", performs the same function as "Voltage Variable Absorptive Attenuator DC - 2 GHz".


AT-259PIN Datasheet PDF - Tyco Electronics

Part Number AT-259PIN
Description Voltage Variable Absorptive Attenuator DC - 2 GHz
Manufacturers Tyco Electronics 
Logo Tyco Electronics Logo 


There is a preview and AT-259PIN download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! AT-259PIN datasheet, circuit

Voltage Variable Absorptive Attenuator
DC - 2 GHz
Features
q Attenuation: 12 dB at 1 GHz
q Low Intermodulation Products
q Low DC Power Consumption: 50 µW
q Single Voltage Control 0 to -4 Volts
q Nanosecond Switching Speed
q Temperature Range: -40˚C to + 85˚C
q Low Cost SOT/143 Plastic Package
q Tape and Reel Packaging Available1
SOT-143
AT-259
V 2.00
Description
M/A-COM’s AT-259 is a GaAs MMIC voltage variable absorp-
tive attenuator in a low cost SOT/143 4-Lead surface mount
plastic package. The AT-259 is ideally suited for use where
attenuation fine tuning, fast switching and very low power
consumption are required. Typical applications include radio,
cellular, GPS equipment and other Automatic Gain/Level
Control circuits.
The AT-259 is fabricated with a monolithic GaAs MMIC using
a mature 1 micron process. The process features full chip pas-
sivation for increased performance and reliability.
Ordering Information
Part Number
AT-259 PIN
AT-259TR
Electrical Specifications, TA = +25°C
AT-259RTR
Parameter
Insertion Loss
Flatness
(Peak to Peak)
VSWR
Test Conditions2
DC – 2.0 GHz
DC – 0.1 GHz
DC – 0.5 GHz
DC – 1.0 GHz
DC – 2.0 GHz
5 dB Attenuation
10 dB Attenuation
15 dB Attenuation
Unit
dB
dB
dB
dB
dB
dB
dB
Trise, Tfall
Ton, Toff
Transients
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
nS
nS
mV
Power
Handling
Linear Operation
Absolute Max.Input Power
dBm
dBm
Measured Relative
0.05 GHz
IP2 to Input Power
0.5 – 2.0 GHz
dBm
(For two-tone Input Power Up to +5 dBm)
Measured Relative
0.05 GHz
dBm
IP3 to Input Power
0.5 – 2.0 GHz
dBm
(For two-tone Input Power Up to +5 dBm)
1. Refer to “Tape and Reel Packaging”Section, or contact factory.
2. All measurements at 1 GHz in a 50system, unless otherwise specified.A control voltage 0 to -4 volts @ 20 µA typ.
3. For levels above 6 dB attenuation. For levels below 6 dB, the minimum specification numbers apply.
Package
SOT 4-Lead Plastic Package
Forward Tape & Reel
Reverse Tape & Reel
Min.
18
18.5
Typ.
2.9
3.0
3.2
3.4
± 0.2
± 2.3
± 7.0
2.1:1
3
5
10
34
47
31(3)
36(3)
Max
3.1
3.2
3.5
3.8
± 0.4
± 2.5
± 7.5
13
21


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AT-259PIN electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AT-259PIN.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AT-259PINThe function is Voltage Variable Absorptive Attenuator DC - 2 GHz. Tyco ElectronicsTyco Electronics

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AT-2     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search