AT-119 Datasheet PDF - Tyco Electronics
Part Number | AT-119 | |
Description | 2.25 Volt Voltage Variable Absorptive Attenuator - 40 dB/ 1.8.2.5 GHz | |
Manufacturers | Tyco Electronics | |
Logo | ||
There is a preview and AT-119 download ( pdf file ) link at the bottom of this page. Total 4 Pages |
Preview 1 page No Preview Available ! 2.25 Volt Voltage Variable Absorptive
Attenuator - 40 dB, 1.8—2.5 GHz
Features
Single Positive Voltage Control 0 to +2.25 Volts
>50 dB Attenuation Range at 2.1 GHz
Low DC Power Consumption
Low Cost SOT-25 Plastic Package
Tape and Reel Packaging Available
Functional Schematic
VCC
5
VCTL
4
Description
M/A-COM’s AT-119 is a GaAs MMIC voltage variable
absorptive attenuator in a low cost, SOT-25 five-lead,
surface mount plastic package. M/A-COM fabricates the
AT-119 with a proven monolithic GaAs self-aligned gate
process that features full chip passivation for performance
and reliability
1 23
RF 100 pF GND 100 pF RF
Applications
The AT-119 is ideally suited for applications that require
fine tuning, linear attenuation with voltage, and very low
power consumption.
Typical applications for the AT-119 include automatic gain
control circuits in satellite radio receivers and other wireless
receivers.
1. VCC = +3.3 VDC @ 50 µA max.
2. VCTL = 0 VDC to +3.3 VDC @ 50 µA max.
3. External DC blocking capacitors are required on all RF
ports.
Absolute Maximum Ratings1
@ TA = +25 °C (unless otherwise specified)
Parameter
Absolute Maximum
Maximum Input Power
+21 dBm
Supply Voltage VCC
ControlVoltage VCTL
Operating Temperature
-1 V, + 8 V
-1 V, VCC +0.5 V
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding any one or a combination of these limits may
cause permanent damage.
Electrical Specifications @ TA = +25 °C, Frequency = 2.4 GHz, VCC = 3.3 VDC1
Parameters
Test Conditions
Units
Min
Typ Max
Minimum Insertions Loss
VCTL = 2.25 VDC
dB
3.0 3.2
Maximum Attenuation
VCTL = 0.5 VDC
dB 37
Attenuation Slope
0.75 VDC < VCTL < 1.75 VDC
dB/V
24
Return Loss
Input Power for 1 dB Change in Attenua-
tion
Input 3rd Order Intercept Point
0.6 VDC < VCTL < 1.75 VDC
0 VDC < VCTL < 3.0 VDC
0 VDC < VCTL < 3.0 VDC
dB
dBm
dBm
>12
>10
>20
Switching Speed
50% VCTL to 10% / 90% RF
nSec
180
Transients
VCTL = 3 VDC, In-Band
mV
10
1. All measurements in a 50-τ system unless otherwise specified. The RF ports must be blocked outside of the package from
ground or any other voltage.
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AT-119 electronic component. |
Information | Total 4 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ AT-119.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
AT-110 | The function is Voltage Variable Absorptive Attenuator/ 30 dB 0.5 - 2 GHz. Tyco Electronics | |
AT-110 | The function is Fixed Attenuators (SMA Type). Hirose Electric | |
AT-1103 | The function is High Power Fixed Attenuators (Radiator built-in). Hirose Electric | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AT-1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |