DataSheet39.com

What is AT-1001?

This electronic component, produced by the manufacturer "Hirose Electric", performs the same function as "High Power Fixed Attenuators (Radiator built-in)".


AT-1001 Datasheet PDF - Hirose Electric

Part Number AT-1001
Description High Power Fixed Attenuators (Radiator built-in)
Manufacturers Hirose Electric 
Logo Hirose Electric Logo 


There is a preview and AT-1001 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! AT-1001 datasheet, circuit

High Power Fixed Attenuators (Radiator built-in)
AT-1000 and AT-1100 Series
AT-1003
AT-1106
sFeatures
1.Small Size and Economical
Beryllia is used for the material of the resistance
element to enable the termination to be of small
size and low cost.
2.Connectors Used
In the coupling portion, the AT-1000 Series has an
SMA type plug-jack and the AT-1100 Series has an
N type plug-jack.
3.High Reliability
These attenuators show stable characteristics for
environments of varying temperature, humidity, and
gases.
sProduct Specifications
Ratings
Frequency range
Characteristic impedance
Maximum Input Power
DC to 8.0 GHz
50 ohms
10W
Item
1.Vibration
2.Shock
Standard
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
sOrdering Information
Part
Material
Finish
Connector Body (Note) Stainless steel
Passivated
Insulator
PTFE
----------
Male contacts
Brass
Gold plating
Female contacts Beryllium copper
Gold plating
Outer conductor
Aluminum
Nickel plating
Coupling (Note)
Stainless steel
Passivated
Radiator
Aluminum
Black alumite
Attenuation element
Metal film
----------
Note: Nickel plated brass is used for the body in the AT-1100 Series.
AT - 10 01
1 23
1 AT: Indicates a fixed attenuator
3 Attenuation
01 : 1dB
2 Indicates the Series Name (Coupling Portion) 03 : 3dB
10: SMA type plug - jack
10 : 10dB
11: N type plug - jack
20 : 20dB
! CAUTION: Beryllia is used in this product. Please follow associated laws when disposing.
84


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AT-1001 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AT-1001.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AT-100The function is Fixed Attenuators (SMA Type). Hirose ElectricHirose Electric
AT-1000The function is High Power Fixed Attenuators (Radiator built-in). Hirose ElectricHirose Electric
AT-1001The function is High Power Fixed Attenuators (Radiator built-in). Hirose ElectricHirose Electric

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AT-1     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search