DataSheet39.com

What is AD7245A?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "LC2MOS 12-Bit DACPORTs".


AD7245A Datasheet PDF - Analog Devices

Part Number AD7245A
Description LC2MOS 12-Bit DACPORTs
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and AD7245A download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! AD7245A datasheet, circuit

a
FEATURES
12-Bit CMOS DAC with Output Amplifier and
Reference
Improved AD7245/AD7248:
12 V to 15 V Operation
؎1/2 LSB Linearity Grade
Faster Interface–30 ns typ Data Setup Time
Extended Plastic Temperature Range (–40؇C to +85؇C)
Single or Dual Supply Operation
Low Power–65 mW typ in Single Supply
Parallel Loading Structure: AD7245A
(8+4) Loading Structure: AD7248A
LC2MOS
12-Bit DACPORTs
AD7245A/AD7248A
AD7245A FUNCTIONAL BLOCK DIAGRAM
GENERAL DESCRIPTION
The AD7245A/AD7248A is an enhanced version of the industry
standard AD7245/AD7248. Improvements include operation
from 12 V to 15 V supplies, a ± 1/2 LSB linearity grade, faster
interface times and better full scale and reference variations with
VDD. Additional features include extended temperature range
operation for commercial and industrial grades.
The AD7245A/AD7248A is a complete, 12-bit, voltage output,
digital-to-analog converter with output amplifier and Zener volt-
age reference on a monolithic CMOS chip. No external user
trims are required to achieve full specified performance.
Both parts are microprocessor compatible, with high speed data
latches and double-buffered interface logic. The AD7245A ac-
cepts 12-bit parallel data which is loaded into the input latch on
the rising edge of CS or WR. The AD7248A has an 8-bit wide
data bus with data loaded to the input latch in two write opera-
tions. For both parts, an asynchronous LDAC signal transfers
data from the input latch to the DAC latch and updates the ana-
log output. The AD7245A also has a CLR signal on the DAC latch
which allows features such as power-on reset to be implemented.
The on-chip 5 V buried Zener diode provides a low noise, tem-
perature compensated reference for the DAC. For single supply
operation, two output ranges of 0 V to +5 V and 0 V to +10 V
are available, while these two ranges plus an additional ± 5 V
range are available with dual supplies. The output amplifiers are
capable of developing +10 V across a 2 kload to GND.
The AD7245A/AD7248A is fabricated in linear compatible
CMOS (LC2MOS), an advanced, mixed technology process that
combines precision bipolar circuits with low power CMOS logic.
The AD7245A is available in a small, 0.3" wide, 24-pin DIP and
DACPORT is a registered trademark of Analog Devices, Inc.
AD7248A FUNCTIONAL BLOCK DIAGRAM
SOIC and in 28-terminal surface mount packages. The
AD7248A is packaged in a small, 0.3" wide, 20-pin DIP and
SOIC and in 20-terminal surface mount packages.
PRODUCT HIGHLIGHTS
1. The AD7245A/AD7248A is a 12-bit DACPORT® on a single
chip. This single chip design and small package size offer
considerable space saving and increased reliability over
multichip designs.
2. The improved interface times on the part allows easy, direct
interfacing to most modern microprocessors.
3. The AD7245A/AD7248A features a wide power supply range
allowing operation from 12 V supplies.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703

line_dark_gray
AD7245A equivalent
AD7245A/AD7248A
AD7248A PIN FUNCTION DESCRIPTION
(DIP PIN NUMBERS)
Pin Mnemonic Description
l VSS
Negative Supply Voltage (0 V for single
supply operation).
2 ROFS
Bipolar Offset Resistor. This provides
access to the on-chip application resistors
and allows different output voltage ranges.
3 REF OUT Reference Output. The on-chip reference
is provided at this pin and is used when
configuring the part for bipolar outputs.
4 AGND
Analog Ground.
5 DB11
Data Bit 11. Most Significant Bit (MSB).
6-11 DB10-DB5 Data Bit 10 to Data Bit 5.
12 DGND
Digital Ground.
13-16 DB4-DB1 Data Bit 4 to Data Bit 1.
17 DB0
Data Bit 0. Least Significant Bit (LSB).
18 CS
Chip Select Input (Active LOW). The de-
vice is selected when this input is active.
Pin Mnemonic Description
19 WR
Write Input (Active LOW). This is used in
conjunction with CS to write data into the
input latch of the AD7245A.
20 LDAC
Load DAC Input (Active LOW). This is
an asynchronous input which when active
transfers data from the input latch to the
DAC latch.
21 CLR
Clear Input (Active LOW). When this in-
put is active the contents of the DAC latch
are reset to all 0s.
22 VDD
23 RFB
Positive Supply Voltage.
Feedback Resistor. This allows access to
the amplifier’s feedback loop.
24 VOUT
Output Voltage. Three different output
voltage ranges can be chosen: 0 V to +5 V,
0 V to +10 V or –5 V to +5 V.
DIP and SOIC
AD7245A PIN CONFIGURATIONS
LCCC
PLCC
REV. A
–5–


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD7245A electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Product Image
and Detail view

AD7245A datasheet


1. 12-bit DACPORT ( PDF )

[ Learn More ]




Download [ AD7245A.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AD7245The function is LC2MOS 12-Bit DACPORT. Analog DevicesAnalog Devices
AD7245AThe function is LC2MOS 12-Bit DACPORTs. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AD72     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search