DataSheet39.com

What is AG203-63?

This electronic component, produced by the manufacturer "ETC", performs the same function as "InGaP HBT Gain Block".


AG203-63 Datasheet PDF - ETC

Part Number AG203-63
Description InGaP HBT Gain Block
Manufacturers ETC 
Logo ETC Logo 


There is a preview and AG203-63 download ( pdf file ) link at the bottom of this page.





Total 6 Pages



Preview 1 page

No Preview Available ! AG203-63 datasheet, circuit

AG203-63
InGaP HBT Gain Block
The Communications Edge TM
Product Information
Product Features
DC – 6000 MHz
+8 dBm P1dB at 900 MHz
+20 dBm OIP3 at 900 MHz
20 dB Gain at 900 MHz
Single Voltage Supply
SOT-363 SMT Package
Internally matched to 50
Applications
Mobile Infrastructure
CATV / DBS
W-LAN / ISM
RFID
Defense / Homeland Security
Fixed Wireless
Product Description
The AG203-63 is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 900 MHz, the AG203-63 typically provides
20 dB of gain, +20 dBm Output IP3, and +8 dBm P1dB.
The device combines dependable performance with
consistent quality to maintain MTTF values exceeding 100
years at mounting temperatures of +85° C and is housed in
a SOT-363 industry-standard SMT package.
The AG203-63 consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT technology process
technology and only requires DC-blocking capacitors, a
bias resistor, and an inductive RF choke for operation.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the AG203-63 will work for other various applications
within the DC to 6 GHz frequency range such as CATV
and fixed wireless.
Functional Diagram
GND 1
6 RF OUT
GND 2
5 GND
RF IN 3
4 GND
Function
Input
Output/Bias
Ground
Pin No.
3
6
1, 2, 4, 5
Specifications
Parameter
Frequency Range
Gain (900 MHz)
Gain (1900 MHz)
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (2)
Output IP2
Noise Figure
Device Voltage
Device Current
Thermal Resistance
Junction Temperature (3)
Units
MHz
dB
dB
dB
dB
dBm
dBm
dBm
dB
V
mA
°C / W
°C
Min
DC
16.8
Typ
900
19.7
17.8
20
16
+8.0
+20.1
+24
3.0
4.05
20
Max
6000
18.8
472
177
Test conditions unless otherwise noted.
1. T = 25º C, Supply Voltage = +5 V, Rbias = 47.5 , Frequency = 900 MHz, 50 System.
2. 3OIP measured with two tones at an output power of -10 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. The junction temperature ensures a minimum MTTF rating of 1 million hours of usage.
Typical Performance
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
500
20.3
-25
-16
+8.1
+20.2
2.9
Typical
900 1900
19.7 17.7
-20 -18
-16 -16
+8.0 +7.4
+20.1 +19.7
3.0 3.2
2140
17.3
-16
-16
+6.8
+19.5
3.2
Test conditions: T = 25º C, Supply Voltage = +5 V, Rbias = 47.5 , 50 System.
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
DC Voltage
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 °C
-55 to +125 °C
+4.5 V
+10 dBm
+250° C
Operation of this device above any of these parameters may cause permanent damage.
Ordering Information
Part No. Description
AG203-63
InGaP HBT Gain Block
AG203-63PCB 700 – 2400 MHz Fully Assembled Eval. Board
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: [email protected] Web site: www.wj.com
April 2004

line_dark_gray
AG203-63 equivalent
AG203-63
InGaP HBT Gain Block
Outline Drawing
Land Pattern
The Communications Edge TM
Product Information
Product Marking
The component will be marked with a “C”
designator followed by a two-digit numeric
lot code on the top surface of the package.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
MSL / ESD Rating
ESD Rating: Class 1C
Value:
Passes at 1000 V min.
Test:
Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
ESD Rating: Level 4
Value:
Passes at 1000 V min.
Test:
Charged Device Model (CDM)
Standard: JEDEC Standard JESD22-C101
MSL Rating: Level 1
Standard: JEDEC Standard J-STD-020A
Mounting Config. Notes
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: [email protected] Web site: www.wj.com
April 2004


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AG203-63 electronic component.


Information Total 6 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AG203-63.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AG203-63The function is InGaP HBT Gain Block. ETCETC
AG203-63PCBThe function is InGaP HBT Gain Block. ETCETC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AG20     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search