|
|
PDF BT139 Data sheet ( Hoja de datos )
| Número de pieza | BT139 | |
| Descripción | Triacs | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
1. BT139 datasheet  Hay una vista previa y un enlace de descarga de BT139 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
BT139 series
Triacs
Rev. 04.00 — 6 July 2004
Product data sheet
1. Product profile
1.1 General description
Passivated triacs in a SOT78 plastic package. intended for use in applications requiring
high bidirectional transient and blocking voltage capability.
1.2 Features
s High thermal cycling performance.
1.3 Applications
s Motor control
s Industrial and domestic lighting, heating
and static switching.
1.4 Quick reference data
s VDRM ≤ 600 V (BT139-600)
s VDRM ≤ 600 V (BT139-600F)
s VDRM ≤ 800 V (BT139-800)
s VDRM ≤ 800 V (BT139-800F)
s VDRM ≤ 800 V (BT139-800G)
s IT(RMS) ≤ 16 A
s ITSM ≤ 155 A.
2. Pinning information
Table 1:
Pin
1
2
3
mb
Discrete pinning
Description
main terminal 1
main terminal 2
gate
main terminal 2
Simplified outline
mb
Symbol
T2
sym051
T1
G
123
SOT78 (TO-220AB)
1 page  
Philips Semiconductors
BT139 series
Triacs
10
Zth(j-mb)
(K/W)
1
001aab098
(1)
(2)
10−1
10−2
10−3
10−5
10−4
10−3
10−2
10−1
(1) Unidirectional.
(2) Bidirectional.
Fig 6. Transient thermal impedance as a function of pulse width.
PD
tp t
1 10
tp (s)
6. Static characteristics
Table 5: Static characteristics
Tj = 25 °C unless otherwise stated.
Symbol Parameter
Conditions
IGT
gate trigger
VD = 12 V;
current
IT = 0.1 A;
Figure 8
T2+ G+
T2+ G−
T2− G−
T2− G+
IL latching current VD = 12 V;
IGT = 0.1 A;
Figure 9
T2+ G+
T2+ G−
T2− G−
T2− G+
IH holding current VD = 12 V;
IGT = 0.1 A;
Figure 10
VT on-state voltage IT = 20 A;
Figure 11
BT139
BT139-F
BT139-G
Unit
Min Typ Max Min Typ Max Min Typ Max
- 5 35 - 5 25 - 5 50 mA
- 8 35 - 8 25 - 8 50 mA
- 10 35 - 10 25 - 10 50 mA
- 22 70 - 22 70 - 22 100 mA
- 7 40 - 7 40 - 7 60 mA
- 20 60 - 20 60 - 20 90 mA
- 8 40 - 8 40 - 8 60 mA
- 10 60 - 10 60 - 10 90 mA
- 6 45 - 6 45 - 6 60 mA
- 1.2 1.6 - 1.2 1.6 - 1.2 1.6 V
9397 750 13358
Product data sheet
Rev. 04.00 — 6 July 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
5 of 12
5 Page 
Philips Semiconductors
BT139 series
Triacs
10. Data sheet status
Level Data sheet status [1] Product status [2] [3]
I Objective data
Development
II Preliminary data
Qualification
III Product data
Production
Definition
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
11. Definitions
12. Disclaimers
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
13. Contact information
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [email protected]
9397 750 13358
Product data sheet
Rev. 04 — 6 July 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet BT139.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BT1306-400D | Logic level triac | NXP Semiconductors |
| BT1306-600D | Logic level triac | NXP Semiconductors |
| BT1308 | Triacs logic level | NXP Semiconductors |
| BT1308W | Triacs logic level | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |