DataSheet39.com

What is DT28F800F3?

This electronic component, produced by the manufacturer "Intel", performs the same function as "FAST BOOT BLOCK FLASH MEMORY".


DT28F800F3 Datasheet PDF - Intel

Part Number DT28F800F3
Description FAST BOOT BLOCK FLASH MEMORY
Manufacturers Intel 
Logo Intel Logo 


There is a preview and DT28F800F3 download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! DT28F800F3 datasheet, circuit

E
PRODUCT PREVIEW
FAST BOOT BLOCK
FLASH MEMORY FAMILY
8 AND 16 MBIT
28F800F3, 28F160F3
Includes Extended and Automotive Temperature Specifications
n High Performance
54 MHz Effective Zero Wait-State
Performance
Synchronous Burst-Mode Reads
Asynchronous Page-Mode Reads
n SmartVoltage Technology
2.7 V3.6 V Read and Write
Operations for Low Power Designs
12 V VPP Fast Factory Programming
n Flexible I/O Voltage
1.65 V I/O Reduces Overall System
Power Consumption
5 V-Safe I/O Enables Interfacing to
5 V Devices
n Enhanced Data Protection
Absolute Write Protection with
VPP = GND
Block Locking
Block Erase/Program Lockout
during Power Transitions
n Density Upgrade Path
8- and 16-Mbit
n Manufactured on ETOX™ V Flash
Technology
n Supports Code Plus Data Storage
Optimized for Flash Data Integrator
(FDI) Software
Fast Program Suspend Capability
Fast Erase Suspend Capability
n Flexible Blocking Architecture
Eight 4-Kword Blocks for Data
32-Kword Main Blocks for Code
Top or Bottom Configurations
Available
n Extended Cycling Capability
Minimum 10,000 Block Erase Cycles
Guaranteed
n Low Power Consumption
Automatic Power Savings Mode
Decreases Power Consumption
n Automated Program and Block Erase
Algorithms
Command User Interface for
Automation
Status Register for System
Feedback
n Industry-Standard Packaging
56-Lead SSOP
µBGA* CSP
Intel’s Fast Boot Block memory family renders high performance asynchronous page-mode and synchronous
burst reads making it an ideal memory solution for burst CPUs. Combining high read performance with the
intrinsic non-volatility of flash memory, this flash memory family eliminates the traditional redundant memory
paradigm of shadowing code from a slow nonvolatile storage source to a faster execution memory for
improved system performance. Therefore, it reduces the total memory requirement which helps increase
reliability and reduce overall system power consumption and cost.
This family of products is manufactured on Intel’s 0.4 µm ETOX™ V process technology. They are available
in industry-standard packages: the µBGA* CSP, ideal for board-constrained applications, and the rugged
56-lead SSOP.
May 1998
Order Number: 290644-001

line_dark_gray
DT28F800F3 equivalent
E
FAST BOOT BLOCK DATASHEET
1.0 INTRODUCTION
This datasheet contains 8- and 16-Mbit Fast Boot
Block memory information. Section 1.0 provides a
flash memory overview. Sections 2.0 through 8.0
describe the memory functionality and electrical
specifications for extended and automotive
temperature product offerings.
1.2 Product Overview
The Fast Boot Block flash memory family provides
density upgrades with pinout compatibility for 8- and
16-Mbit densities. This family of products are high
performance, low voltage memories with a 16-bit
data bus and individually erasable blocks. These
blocks are optimally sized for code and data
storage. Eight 4-Kword parameter blocks are
positioned at either the top (denoted by -T suffix) or
bottom (denoted by -B suffix) of the address map.
The rest of the device is grouped into
32-Kword main blocks. The upper two (or lower
two) parameter and all main blocks can be locked
for complete code protection.
The device’s optimized architecture and interface
dramatically increases read performance beyond
previously attainable levels. It supports
asynchronous page-mode and synchronous burst
reads from main blocks (parameter blocks support
single asynchronous and synchronous reads).
Upon initial power-up or return from reset, the
device defaults to a page-mode read configuration.
Page-mode read configuration is ideal for non-clock
memory systems and is compatible with page-
mode ROM. Synchronous burst reads are enabled
by writing to the read configuration register. In
synchronous burst mode, the CLK input increments
an internal burst address generator, synchronizes
the flash memory with the host CPU, and outputs
data on every rising (or falling) CLK edge up to
54 MHz (25 MHz for automotive temperature). An
output signal, WAIT#, is also provided to ease CPU
to flash memory communication and
synchronization during continuous burst operations.
In addition to the enhanced architecture and
interface, this family of products incorporates
SmartVoltage technology which enables fast factory
programming and low power designs. Specifically
designed for low voltage systems, Fast Boot Block
flash memory components support read operations
at 2.7 V (3.3 V for automotive temperature) VCC and
PRODUCT PREVIEW
block erase and program operations at 2.7 V
(3.3 V for automotive temperature) and 12 V VPP.
The 12 V VPP option renders the fastest program
performance to increase factory programming
throughput. With the 2.7 V (3.3 V for automotive
temperature) VPP option, VCC and VPP can be tied
together for a simple, low power design. In addition
to the voltage flexibility, the dedicated VPP pin gives
complete data protection when VPP VPPLK.
The flexible input/output (I/O) voltage capability
helps reduce system power consumption and
simplify interfacing to sub 2.7 V and 5 V CPUs.
Powered by VCCQ pins, the I/O buffers can operate
at a lower voltage than the flash memory core. With
VCCQ voltage at 1.65 V, the I/Os swing between
GND and 1.65 V, reducing I/O power consumption
by 65% over standard 3 V flash memory
components. The low voltage and 5 V-safe feature
also helps ease CPU interfacing by adapting to the
CPU’s bus voltage.
The device’s Command User Interface (CUI) serves
as the interface between the system processor and
internal flash memory operation. A valid command
sequence written to the CUI initiates device
automation. This automation is controlled by an
internal Write State Machine (WSM) which
automatically executes the algorithms and timings
necessary for block erase and program operations.
The status register provides WSM feedback by
signifying block erase or program completion and
status.
Block erase and program automation allows erase
and program operations to be executed using an
industry-standard two-write command sequence. A
block erase operation erases one block at a time,
and data is programmed in word increments. Erase
suspend allows system software to suspend an
ongoing block erase operation in order to read from
or program data to any other block. Program
suspend allows system software to suspend an
ongoing program operation in order to read from
any other location.
Fast Boot Block flash memory devices offer two low
power savings features: Automatic Power Savings
(APS) and standby mode. The device automatically
enters APS mode following the completion of a read
cycle. Standby mode is initiated when the system
deselects the device by driving CE# inactive or
RST# active. RST# also resets the device to read
array, provides write protection, and clears the
status register. Combined, these two features
significantly reduce power consumption.
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for DT28F800F3 electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ DT28F800F3.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
DT28F800F3The function is FAST BOOT BLOCK FLASH MEMORY. IntelIntel

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

DT28     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search