1N5620 Datasheet PDF - Microsemi
Part Number | 1N5620 | |
Description | STANDARD RECOVERY GLASS RECTIFIERS | |
Manufacturers | Microsemi | |
Logo | ||
There is a preview and 1N5620 download ( pdf file ) link at the bottom of this page. Total 3 Pages |
Preview 1 page No Preview Available ! SCOTTSDALE DIVISION
1N5614 thru 1N5622
VOIDLESS-HERMETICALLY-SEALED
STANDARD RECOVERY GLASS
RECTIFIERS
DESCRIPTION
APPEARANCE
This “standard recovery” rectifier diode series is military qualified to MIL-PRF-
19500/427 and is ideal for high-reliability applications where a failure cannot be
tolerated. These industry-recognized 1.0 Amp rated rectifiers for working peak
reverse voltages from 200 to 1000 volts are hermetically sealed with voidless-
glass construction using an internal “Category I” metallurgical bond. These
devices are also available in surface mount MELF package configurations by
adding a “US” suffix (see separate data sheet for 1N5614US thru 1N5622US).
Microsemi also offers numerous other rectifier products to meet higher and lower
current ratings with various recovery time speed requirements including fast and
ultrafast device types in both through-hole and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
“A” Package
FEATURES
APPLICATIONS / BENEFITS
• Popular JEDEC registered 1N5614 to 1N5622 series
• Voidless hermetically sealed glass package
• Triple-Layer Passivation
• Internal “Category I” Metallurgical bonds
• Working Peak Reverse Voltage 200 to 1000 Volts.
• JAN, JANTX, JANTXV, and JANS available per MIL-
PRF-19500/427
• Surface mount equivalents also available in a square
end-cap MELF configuration with “US” suffix (see
separate data sheet for 1N5614US thru 1N5622US)
• Standard recovery 1 Amp rectifiers 200 to 1000 V
• Military and other high-reliability applications
• General rectifier applications including bridges, half-
bridges, catch diodes, etc.
• High forward surge current capability
• Extremely robust construction
• Low thermal resistance
• Controlled avalanche with peak reverse power
capability
• Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
• Junction & Storage Temperature: -65oC to +200oC
• Thermal Resistance: 38oC/W junction to lead at 3/8
inch (10 mm) lead length from body
• Thermal Impedance: 4.5oC/W @ 10 ms heating time
• Average Rectified Forward Current (IO): 1.0 Amps @
TA = 55ºC and 0.75 Amps @ TA = 100ºC
• Forward Surge Current: 30 Amps @ 8.3 ms half-sine
• Solder Temperatures: 260ºC for 10 s (maximum)
MECHANICAL AND PACKAGING
• CASE: Hermetically sealed voidless hard glass with
Tungsten slugs (package dimensions on last page)
• TERMINATIONS: Axial leads are copper with
Tin/Lead (Sn/Pb) finish. Note: Previous JANS
inventory had solid Silver axial-leads and no finish.
• MARKING: Body paint and part number, etc.
• POLARITY: Cathode band
• TAPE & REEL option: Standard per EIA-296
• WEIGHT: 340 mg
ELECTRICAL CHARACTERISTICS
WORKING
MINIMUM
AVERAGE
FORWARD
REVERSE
MAXIMUM REVERSE
PEAK
BREAKDOWN
RECTIFIED
VOLTAGE
CURRENT
SURGE RECOVERY
TYPE
REVERSE
VOLTAGE
CURRENT
(MAX.)
(MAX.)
CURRENT (NOTE 3)
VOLTAGE VRWM VBR @ 50μA
IO @ TA
(NOTE 1)
VF @ 3A
IR @ VRWM
IFSM
(NOTE 2)
trr
VOLTS
VOLTS
AMPS
55oC
100oC
VOLTS
μA
25oC
100oC
AMPS
μs
1N5614
200
220 1.00 .750
0.5 25
30
2.0
1N5616
400
440
1.00 .750 0.8 MIN.
0.5
25
30
2.0
1N5618
600
660 1.00 .750
0.5 25
30
2.0
1N5620
800
880
1.00 .750 1.3 MAX. 0.5
25
30
2.0
1N5622
1000
1100
1.00 .750
0.5 25
30
NOTE 1: From 1 Amp at TA = 55oC, derate linearly at 5.56 mA/ oC to 0.75 Amp at TA = 100oC. From TA = 100oC,
derate linearly at 7.5 mA/oC to 0 Amps at TA = 200 oC. These ambient ratings are for PC boards where thermal
resistance from mounting point to ambient is sufficiently controlled where TJ(max) does not exceed 175 oC.
NOTE 2: TA = 100oC, f = 60 Hz, IO = 750 mA for ten 8.3 ms surges @ 1 minute intervals
2.0
NOTE 3: IF = 0.5A, IRM = 1A, IR(REC) = 0.250A
Copyright © 2007
1-15-2007 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 1N5620 electronic component. |
Information | Total 3 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ 1N5620.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
1N5620 | The function is STANDARD RECOVERY RECTIFIERS. Digitron Semiconductors | |
1N5620 | The function is RECTIFIER. SEMTECH | |
1N5620 | The function is GLASS PASSIVATED MEDIUM-SWITCHING JUNCTION RECTIFIER. General Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
1N56
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |