CB1A-10S-1.5H Datasheet PDF - Hirose Electric
Part Number | CB1A-10S-1.5H | |
Description | Memory Stick Connectors | |
Manufacturers | Hirose Electric | |
Logo | ||
There is a preview and CB1A-10S-1.5H download ( pdf file ) link at the bottom of this page. Total 10 Pages |
Preview 1 page No Preview Available ! NEW
Memory Stick® Connectors
CB1 Series
Card Push Insert/Push Eject
<CB1G Series>
sOutline
Receptacle connectors for use with the new generation of
digital media devices requiring “Memory Stick®” type of
consumer removable memory card.
Several variations are available: Miniature, Low Profile and
with or without ejection mechanism.
sFeatures
1. Indication of Incorrect Card Insertion
The connector will not allow the card to be complete
inserted from the wrong end or reversed.
The card will stop about 7mm before complete insertion
position, visually indicating incorrect insertion.
2. Protection of the Contacts
Incorrect insertion of the card will not damage the
contacts. The card can be easily withdrawn and re-
inserted correctly.
3. Excellent Card Handling
The type that is equipped with an ejection mechanism
provides a long ejection of the card which offers excellent
card handling qualities.
*Memory Stick is a registered trademark of the Sony Corporation.
q Card ejection distance of 10 mm
q Mounting height of 3.5 mm
q Mounting area: Smaller design is 78% of former
size
Button Touch Ejection
<CB1F Series>
q Card ejection with tactile button operation
q Card ejection distance of 10 mm
q Equipped with card ejection switch
Without Card Ejection
<CB1D Series>
q Miniaturized, low profile design
q Improved installation to the equipment is permitted
using (M1.7) tapping screws
q Can be equipped with an ejection mechanism
depending on the design of the equipment side
portion
Note: Please position the card ejection button at the side of the equipment.
2003.12
1
|
|
sLeft Ejection
23.1
21.8
4.45 Memory stick card outline
8.75
16.45
3.65 0.1
4.05
Part No.
CL No.
CB1C-10S-1.5H-EJL(56) CL689-0006-1-56
BPCB mounting pattern
Front edge of the printed
circuit board
10.5±0.03
2-Ø1.3+00.05
0.9±0.1
P= 1.5±0.05
13.5±0.05
3.2±0.1
4.55±0.05
sRight Ejection
29.9
CONTACT No.1
Ø1.8
10.5
2 0.6
4.55 P=1.5
13.5
9.25 17.35
4.05
Memory stick card outline 4.4
3.65
23
21.8
Part No.
CL No.
CB1C-10S-1.5H-EJR(59) CL689-0007-4-59
BPCB mounting pattern
Front edge of the printed
circuit board
10.5±0.03
2-Ø1.3+0.005
0.9±0.1
P=1.5±0.05
13.5±0.05
3.2±0.1
4.55±0.05
10.5
2 0.6
4.55 P=1.5
13.5
31.2
CONTACT No.1
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for CB1A-10S-1.5H electronic component. |
Information | Total 10 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ CB1A-10S-1.5H.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
CB1A-10S-1.5H | The function is Memory Stick Connectors. Hirose Electric | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
CB1A
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |