DataSheet39.com

What is OPB840W?

This electronic component, produced by the manufacturer "TT", performs the same function as "Slotted Optical Switch".


OPB840W Datasheet PDF - TT

Part Number OPB840W
Description Slotted Optical Switch
Manufacturers TT 
Logo TT Logo 


There is a preview and OPB840W download ( pdf file ) link at the bottom of this page.





Total 8 Pages



Preview 1 page

No Preview Available ! OPB840W datasheet, circuit

Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Features:
0.125” (3.18 mm) wide slot
Choice of electrical output parameters
Choice of aperture
Choice of opaque or IR transmissive shell material
Side mount configuration
Choice of lead spacing (L Series)
24” [610 mm] 26 AWG wire leads (W Series)
L Package
Product Photo Here
W Package
Description:
OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard
product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers
24” (610mm) 26AWG wire leads.
Building from a standard housing that utilizes a .375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for
the L Series) or 24” [610 mm] UL approved 26 AWG wire leads (W Series).
Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to
visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device throat)
are made of either IR transmissive plastic (for applications where aperture contamination may occur) or of opaque
plastic with aperture openings (for maximum protection against ambient light).
Switching of the phototransistor occurs whenever an opaque object passes through the slot and interrupts the
beam.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
Applications:
Non-contact interruptive object sensing
Assembly line automation
Machine automation
Equipment security
Machine safety
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 1 of 8

line_dark_gray
OPB840W equivalent
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Combined
Collector-Emitter Saturation Voltage
Parameter A (OPB830L,OPB840L)
(OPB835L, OPB845L)
(OPB830W,OPB840W)
(OPB835W, OPB845W)
-
- 0.4
V IC = 400 µA, IF = 20 mA
VCE(SAT)
Parameter B
(OPB831L,OPB841L)
(OPB836L,OPB846L)
(OPB831W,OPB841W)
(OPB836W,OPB846W)
-
- 0.4
V IC = 800 µA, IF = 10 mA
Parameter C (OPB832L,OPB842L)
(OPB837L,OPB847L)
(OPB832W,OPB842W)
(OPB837W,OPB847W)
-
- 0.6
V IC = 1800 µA, IF = 20 mA
On-State Collector Current
Parameter A (OPB830L,OPB840L)
(OPB835L, OPB845L)
(OPB830W,OPB840W)
0.625
-
-
mA VCE = 10 V, IF = 20 mA
(OPB835W, OPB845W)
IC(ON)
Parameter B (OPB831L,OPB841L)
(OPB836L,OPB846L)
(OPB831W,OPB841W)
1.250
-
-
mA VCE = 5 V, IF = 10 mA
(OPB836W,OPB846W)
Parameter C (OPB832L,OPB842L)
(OPB837L,OPB847L)
(OPB832W,OPB842W)
2.250
-
-
mA VCE = .6 V, IF = 20 mA
(OPB837W,OPB847W)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 5 of 8


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for OPB840W electronic component.


Information Total 8 Pages
Link URL [ Copy URL to Clipboard ]
Download [ OPB840W.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
OPB840The function is Slotted Optical Switch. TTTT
OPB840LThe function is Slotted Optical Switch. TTTT
OPB840LThe function is SLOTTED OPTICAL SWITCHES. ETCETC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

OPB8     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search